Note:
- thermostat (see accessories) can be used to turn the kit on
- the vent in the destination room should be placed as far away from the door as possible
If extra duct, vents or joiners are needed we have a range of heat transfer parts.
If you would like to view our general Heat Transfer Kit installation guide click here
About this kit
This is our premium offering for the simple reason that it is a very quiet fan! It has been specifically engineered to operate quietly, the casing is larger and has inbuilt insulation. In terms of performance the fan will provide the same characteristics as the TT Mixflow fan.
No Duct | 6m Duct | 12m Duct | 20m Duct | 30m Duct | 40m Duct | |
---|---|---|---|---|---|---|
TT Silent 150 | 520 m3/hr | 450 m3/hr | 400 m3/hr | 300 m3/hr | 250 m3/hr | 200 m3/hr |
*These figures are all based on duct-work of the same diameter as the fan and are approximate calculations. This kit is provided with 12m of ducting. Figures are based on the fan wired to the high speed.
The big difference with this fan is in the dB(a) rating. Whilst the capacity of the motor is the same, the noise is different:
TT Mixflow 150: 44db(A) (33 on low speed setting)
TT Silent 150: 33db(A) (26 on lower speed)
If noise is a primary concern then the Premium silent fan may be suitable for you.
Installation
The kits can be installed by the client as it is relatively easy to install. Some handyman skills are required to make holes in the plaster, etc. An electrician is needed to provide power to the fan (or a power point) and also to install a thermostat if required. The electrician can also install the system at the same time.
The fan is provided with a lead and plug, so it can be plugged in to an available power point which an electrician could install independent of the system installation.
An optional thermostat is available (see accessories below) BUT NOTE THAT AN ELECTRICIAN WILL THEN BE REQUIRED TO INSTALL IT.
Kerrie (verified owner) –
Very good quality and everything we need to install it (except that hole saws would be helpful)
Kerrie Nixon –
Very good quality and everything we need to install it (except that hole saws would be helpful)
Andre –
Philip –
As per last resoonse… great product and does its job well
Margaret –
I ordered the heat transfer fan on Sunday it was delivered Monday
Greg –
Extremely quiet motor. System works perfectly.
As I have placed the two speed fan switch up high I think it would be an advantage to have a led on light fitted to the switch .