BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
TT Mixflow In Line Fan 125mm w/ Lead & Plug
IN STOCK | Typically dispatches within 1-2 business days
$165.00
High Speed Capacity: 280 m3/hr (77.77 l/s)
Motor Type: Mixflow
Ductable: Yes (125mm duct diameter)
View full technical specs further down the page
Engineered for durability and longevity, the TT Mixed Flow 125mm inline exhaust fan features a long-life, continuous-rated motor capable of two-speed operation. For maximum convenience, the unit comes pre-hardwired with a lead and plug set to the high-speed capacity of 280 m³/hr. While a lower setting of 200 m³/hr is available for significantly quieter performance, accessing this mode requires an electrician to adjust the internal wiring, as the unit does not include an external speed switch.
Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
Add a Run on timer
This fan can be used with the following run on timer. An electrician will be required to install a 4 pin plug outlet. This timmer allows for the run on period to be adjusted from 0-60 minutes.
Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this on the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length. The product’s actual colour may vary – in some cases, there may be a colour difference between the motor and the intake/outlet points (one may be slightly more grey than the other).
| Manufacturer | Fanco |
|---|---|
| Model Number | TT 125 |
| Material | Plastic |
| Capacity (m3/hr) | 280 m3/hr |
| Capacity (L/S) | 77.77 L/S |
| Motor Type | Mixflow |
| Recommended Room Size (Based on Achieving 15 air changes per hour) | 18.6 m3 |
| Noise Level | 37 dB(A) |
| IP Rating | IPX4 |
| Voltage | 230 |
| Installation Statement | This fan comes with a lead and plug for connection to a power socket, To use this product in conjunction with hardwired accessories, an electrician will be required |
| Duct Size | 125mm |
| Motor RPM | 2455 |
| Max Temperature of Transferred Air | 60 °C |
| Warranty | Fanco – The manufacturer offers a 2 year replacement warranty (conditions apply) |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
| Lead & Plug Customisation Disclaimer | Please be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length. |
7 reviews for TT Mixflow In Line Fan 125mm w/ Lead & Plug
Only logged in customers who have purchased this product may leave a review.
You may also like…
Mark (verified owner) –
Does a great job keeping the bathroom demisted
Joachim –
In-line fan unit was perfect set up for our dryer
Straight forward plug and play
MARK –
For the cavity that I have in my ceiling, it does the job, but in an ideal world it is not powerful enough for a small bathroom (toilet & shower)
Fredrik –
Tim (verified owner) –
Richard Reed (verified owner) –
Ben Stutchbury (verified owner) –
Quiet and good quality fan