Capacity: 358 m3/hr (99.44 l/s) Motor Type: Axial Ductable: Yes (150mm duct diameter) View full technical specs further down the page
A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.
Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.
Recommended Room Size (Based on Achieving 15 air changes per hour)
Motor Power (Wattage)
220 – 240
This fan requires hardwiring by an electrician
Fanco – The manufacturer offers a 2 year replacement warranty (conditions apply)
All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible
Room Size Recommendation Disclaimer
As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice.
Only logged in customers who have purchased this product may leave a review.