Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 65 results

  • The designer ventilation hood is a high quality, modern external vent designed to prevent ingress of water into ventilation equipment from the outside. This vent has a 106mm round hole designed to be used in conjunction with 100mm rigid piping or ducting. The vent has no flange, making it a great solution for installations that may have limited wall cavity space.

    $69.00 $49.00
  • The designer ventilation hood is a high quality, modern external vent designed to prevent ingress of water into ventilation equipment from the outside. This vent has a 132mm round hole designed to be used in conjunction with 125mm rigid piping or ducting. The vent has no flange, making it a great solution for installations that may have limited wall cavity space.

    $75.00 $55.00
  • The designer ventilation hood is a high quality, modern external vent designed to prevent ingress of water into ventilation equipment from the outside. This vent has a 160mm round hole designed to be used in conjunction with 150mm rigid piping or ducting. The vent has no flange, making it a great solution for installations that may have limited wall cavity space.

    $79.00 $59.00
  • Please note: a 350mm duct connecting spiggot is included with this vent. It is made to order and is approx 200mm deep and has a diameter of 350mm. As it is made to order the lead time can be approx 4-7 working days, please bear this in mind when ordering. We are also unable to accept returns for a ‘change of mind’ reason on this product.

    $158.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise). This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 150mm diameter duct
    5.00 out of 5
    $59.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • Premium exterior aluminium vent with duct adaptor. Fits standard brick sizes (see dimensions tab for specific measurements). The fascia is quality weatherproof aluminium with an inbuilt anti-intrusion mesh. The boot at the rear of the vent is white plastic and opens out to allow for connection to 150mm ducting.

    5.00 out of 5
    $89.00
    PRE-SALE
    ETA Late April
  • Edmonds General Purpose vent is ideal for a variety of vehicles and stationary locations. This includes vans, trucks, trailers, caravans, boats, small garden sheds, portable buildings and so on. It is entirely wind driven and helps to alleviate the discomfort of stuffy environments by improving the quality of the air and removing heat and odours from the vehicle. Made from impact resistant polymer and incorporating high carbon chromium steel ball bearings makes it durable. It is also weatherproof and simple to install.


    For dimensions and to view an installation diagram please see the dimensions tab below.

    $89.00
  • Metal vent 150mm x 150mm with no connecting flange at the back.
     
    Simple screw fixing vent with specially treated Zinc Phosphate corrosion protection to ensure longevity in outdoor areas.
     
    The vent also includes a protective insect screen.

    $22.00
  • Metal vent 250mm x 250mm with no connecting flange at the back.

    Simple screw fixing vent with specially treated Zinc Phosphate corrosion protection to ensure longevity in outdoor areas.

    The vent also includes a protective insect screen. Made of Steel.

    $25.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 200mm diameter duct
    • Face Size: 265mm x 265mm
    4.50 out of 5
    $149.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    5.00 out of 5
    $72.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $65.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.
     
    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $69.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $64.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $58.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $50.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • Metal vent with no connecting flange at the back. 350mm x 350mm face – please refer to dimensions diagram for more information.

    $79.00
  • A metal passive sub floor vent sized as a standard brick. Simply remove brick and insert metal vent in place. Multiple vents strategically positioned may be needed to provide sufficient passive ventilation. These vents can also be used in conjunction with our sub floor ventilation exhaust fans and kits.

    5.00 out of 5
    $15.00
  • Gravity vent designed for 250mm ducting. It has gravity flaps that opens up when the fan runs (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise).

    • Made of quality and durable plastic
    • Includes a backdraft shutter as well as the external gravity flaps
    • Includes easy plasterboard installation clips (see image of rear of vent).
    • Fascia Dimensions: 310x310mm (square)
    4.00 out of 5
    $69.00