Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 62 results

  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 400mm diameter ducting. The rear boot will connect to 400mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 350mm diameter ducting. The rear boot will connect to 350mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    4.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    4.50 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 250mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 250mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 200mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 200mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    $35.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    5.00 out of 5
    $72.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $65.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $50.00
  • A modern internal vent deigned to look like the popular 'Chico' exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 100mm ducting.

    $35.00 $29.00
  • A modern internal vent deigned to look like the popular 'Chico' exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 125mm ducting.

    5.00 out of 5
    $37.00 $35.00
  • A modern internal vent designed to look like the popular ‘Chico’ exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 150mm ducting.

    4.00 out of 5
    $45.00 $39.00
  • made in new zealandspec sheet

    The Fanco Frameless Extract Grille is a very stylish solution if you are looking for a completely flush mount internal vent. The vent can either be ceiling or side wall mounted and is suitable for plaster board or tiled ceilings and walls, in bathrooms, showers, laundries and kitchens.

     

    Framework or fixings are not visible. Once the unit is plastered in place the flexible duct is pulled down through the hidden frame and attached to the central plaque and spigot using a simple and completely invisible screwed fixing. The exposed surface of the plaque is level with the ceiling and with its white colour, can be painted.

     

    See the Dimensions Tab to view the fan when installed.

    $449.00 $295.00
  • The vent and 12v light is a distinctive light incorporated into a circular diffuser vent suitable for showers and bathrooms. For use with inline fans only.
     
    The vent can be used within the splash area of your shower or bath and will provide a warm glow of soft light. This vent is to be used with inline systems only. The light is powered by remote SELV (safety extra low voltage) isolating transformer – THIS WILL NEED TO BE SUPPLIED BY YOUR INSTALLING ELECTRICIAN.

    5.00 out of 5
    $95.00

  • Material: Impact-resistant UV-stabilised PVC
     
    Grey surface mountable gravity vent with a 310mm diameter hole.
     
    Flaps have an aerofoil section with the weight concentrated at the pivot point. This feature ensures easy opening and minimal pressure drop.
     
    Nylon spindles give silent and maintenance-free operation.

    $115.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $20.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

     
    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

     
    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $16.00