Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 39 results

  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise). This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 150mm diameter duct
    5.00 out of 5
    $59.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 200mm diameter duct
    • Face Size: 265mm x 265mm
    4.50 out of 5
    $149.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    5.00 out of 5
    $72.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $65.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.
     
    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $69.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $64.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    5.00 out of 5
    $58.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $50.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    4.50 out of 5
    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • A metal passive sub floor vent sized as a standard brick. Simply remove brick and insert metal vent in place. Multiple vents strategically positioned may be needed to provide sufficient passive ventilation. These vents can also be used in conjunction with our sub floor ventilation exhaust fans and kits.

    5.00 out of 5
    $15.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    A 300mm x 100mm plastic floor vent which provides a modern look, with slightly rounded corners.
     
    These floor vents have a smooth, fully closing damper operation with flush button control mechanism. The vent also comes with a 300mm x 100mm boot that connects to 150mm flexible ducting.
     

    • Super high strength – compared to polycarbonate vents.
    • Maintenance and Rust free.
    • Dishwasher safe.
    • 5 Year replacement warranty.

    $38.00
  • A metal door grille designed to fit in a hole sized 300mm x 150mm. Easy install, this vent will suit a door in thickness from 30mm to 55mm. Simple clip-in design eliminates visible screws.

    $65.00 $55.00
  • A metal door grille designed to fit in a hole sized 300mm x 300mm. Easy install, this vent will suit a door in thickness from 30mm to 55mm. Simple clip-in design eliminates visible screws.

    $99.00
  • A rectangular shaped double sided door vent designed to aid air extraction in a bathroom.

    $45.00
  • A metal door grille designed to fit in a hole sized 450mm x 150mm. Easy install, this vent will suit a door in thickness from 30mm to 55mm. Simple clip-in design eliminates visible screws.

    $75.00
  • A metal door grille designed to fit in a hole sized 500mm x 300mm. Easy install, this vent will suit a door in thickness from 30mm to 55mm. Simple clip-in design eliminates visible screws.

    $105.00
  • A metal door grille designed to fit in a hole sized 600mm x 300mm. Easy install, this vent will suit a door in thickness from 30mm to 55mm. Simple clip-in design eliminates visible screws.

    $105.00 $95.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 100mm diameter duct
    5.00 out of 5
    $30.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 125mm diameter duct
    5.00 out of 5
    $35.00