Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 42 results

  • The MVMO External vent is designed to be an easy installation solution as a terminating external vent. The vent has no screw holes, instead it comes with a spacer mechanism to mount the vent in a 150mm solid tube. Take a look at the image gallery to see this rear component, this plastic part pulls out and you just need to push the two metal arms in and slide the rear into the tubing. Also includes a built in insect screen.

    $29.00 $25.00
  • Edmonds General Purpose vent is ideal for a variety of vehicles and stationary locations. This includes vans, trucks, trailers, caravans, boats, small garden sheds, portable buildings and so on. It is entirely wind driven and helps to alleviate the discomfort of stuffy environments by improving the quality of the air and removing heat and odours from the vehicle. Made from impact resistant polymer and incorporating high carbon chromium steel ball bearings makes it durable. It is also weatherproof and simple to install.


    For dimensions and to view an installation diagram please see the dimensions tab below.

    $89.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    $35.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • This listing is for a vent only – this product does not have a motor.

    With a sleek glass face and low profile design, this vent is an elegant finishing touch for a modern bathroom. This vent made to be used in conjunction with an inline motor. It is designed for ceiling installation and has plasterboard clips to secure the unit in place. For installation, a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $75.00
  • This listing is for a vent only – this product does not have a motor.

    With a sleek glass face and low profile design, this vent is an elegant finishing touch for a modern bathroom. This vent made to be used in conjunction with an inline motor. It is designed for ceiling installation and has plasterboard clips to secure the unit in place. For installation, a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $75.00
  • This listing is for a vent only – this product does not have a motor.

    This vent made to be used in conjunction with an inline motor. It is designed for ceiling installation and has plasterboard clips to secure the unit in place. For installation, a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $64.00
  • This listing is for a vent only – this product does not have a motor.

    This vent made to be used in conjunction with an inline motor. It is designed for ceiling installation and has plasterboard clips to secure the unit in place. For installation, a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $64.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    5.00 out of 5
    $72.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $65.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $50.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    4.50 out of 5
    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $59.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • The vent and 12v light is a distinctive light incorporated into a circular diffuser vent suitable for showers and bathrooms. For use with inline fans only.
     
    The vent can be used within the splash area of your shower or bath and will provide a warm glow of soft light. This vent is to be used with inline systems only. The light is powered by remote SELV (safety extra low voltage) isolating transformer – THIS WILL NEED TO BE SUPPLIED BY YOUR INSTALLING ELECTRICIAN.

    5.00 out of 5
    $95.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    $59.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $82.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    $55.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    $45.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    $40.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    $59.00