Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 62 results

  • Please note: a 350mm duct connecting spiggot is included with this vent. It is made to order and is approx 200mm deep and has a diameter of 350mm. As it is made to order the lead time can be approx 4-7 working days, please bear this in mind when ordering. We are also unable to accept returns for a ‘change of mind’ reason on this product.

    $158.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise). This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 150mm diameter duct
    5.00 out of 5
    $59.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • Premium exterior aluminium vent with duct adaptor. Fits standard brick sizes (see dimensions tab for specific measurements). The fascia is quality weatherproof aluminium with an inbuilt anti-intrusion mesh. The boot at the rear of the vent is white plastic and opens out to allow for connection to 150mm ducting.

    5.00 out of 5
    $89.00
    PRE-SALE
    ETA Early April
  • Metal vent 150mm x 150mm with no connecting flange at the back.
     
    Simple screw fixing vent with specially treated Zinc Phosphate corrosion protection to ensure longevity in outdoor areas.
     
    The vent also includes a protective insect screen.

    $22.00
  • Metal vent 250mm x 250mm with no connecting flange at the back.

    Simple screw fixing vent with specially treated Zinc Phosphate corrosion protection to ensure longevity in outdoor areas.

    The vent also includes a protective insect screen. Made of Steel.

    $25.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 200mm diameter duct
    • Face Size: 265mm x 265mm
    4.50 out of 5
    $149.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 400mm diameter ducting. The rear boot will connect to 400mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 350mm diameter ducting. The rear boot will connect to 350mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    4.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    4.50 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 250mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 200mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $79.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.
     
    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $69.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $64.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $58.00
  • A modern internal vent deigned to look like the popular 'Chico' exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 100mm ducting.

    $35.00 $29.00
  • A modern internal vent deigned to look like the popular 'Chico' exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 125mm ducting.

    5.00 out of 5
    $37.00 $35.00
  • A modern internal vent designed to look like the popular ‘Chico’ exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 150mm ducting.

    4.00 out of 5
    $45.00 $39.00