Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 33 results

  • This basic rangehood accessory kit designed to exhaust through the roof – the kit consists of:
     
    1x 3m of 100mm semi rigid 'fire rated' ducting
    2x metal worm clamps 100mm
    1x Roof cowl kit 100mm (tiled roof dekite) – note colour of cowl kit is silver, not the dark colour shown in image

    *Installation by a professional is highly recommended* If you need more ducting we have extra 3m lengths listed as an accessory below.
     
    Roof Cowl Information:
    Roof Cowl Kits are designed for either metal or tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Ducting Information:
    Supplied with the most efficient type of flexible ducting – Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting. You can shorten ducting length with sharp knife if required. Conversely it can be extended with additional duct, sleeve and clamps.

    $184.00
  • The designer ventilation hood is a high quality, modern external vent designed to prevent ingress of water into ventilation equipment from the outside. This vent has a 106mm round hole designed to be used in conjunction with 100mm rigid piping or ducting. The vent has no flange, making it a great solution for installations that may have limited wall cavity space.

    $69.00 $49.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    5.00 out of 5
    $58.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $50.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $55.00
  • A modern internal vent deigned to look like the popular 'Chico' exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 100mm ducting.

    $35.00 $29.00
  • This package includes a vent with gravity operated shutters (suitable for mounting on a wall, ceiling or eave) and 2m of 100mm diameter flexible ducting.
     
    It is usually used with ductable exhaust fans mounted on the ceiling and allows for exhausting air outside through a wall.
     
    The vent/grille is a white gravity vent that has been treated to be safely placed outside.

    $18.00
  • A backdraft shutter is used with inline fans and duct, to stop air flowing in the “back” direction. It has “butterfly” wings and a very weak spring to minimise airflow reduction.
     
    Made of metal, this backdraft shutter will connect to 100mm ducting.

    $25.00
  • This 6m length of flexible duct can be cut down to suit required length. For best airflow, it is recommended to keep the duct tight, as short as possible, avoid sharp turns and keep duct as round in shape (do not squash it).
     
    Choose the duct size to suit the exhaust fan and for best airflow, use same size or bigger duct than required by the fan.
     
    This is non-insulated ducting (please see alternative product listings for insulated ducting if required).

    5.00 out of 5
    $22.00 $13.50
  • This multi-layed, metallic duct offers superior temperature ratings and flame resistant protection. From -18 degrees to +130 degrees. Perfect for rangehoods and clothes dryers.

    $29.00
  • This multi-layed, metallic duct offers superior temperature ratings and flame resistant protection. From -18 degrees to +130 degrees. Perfect for rangehoods and clothes dryers.

    $60.00
  • Supplied with the most efficient type of flexible ducting – Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting. You can shorten ducting length with sharp knife if required. Conversely it can be extended with additional duct, sleeve and clamps.
     
    This basic rangehood accessory kit consists of:
    1x 3m of 100mm semi rigid 'fire rated' ducting
    2x metal worm clamps 100mm
    1x External vent with gravity shutters 100mm
     
    *Installation by a professional is highly recommended* If you need more ducting we have extra 3m lengths listed as an accessory below:

    5.00 out of 5
    $68.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out. In windy areas, the flaps can move due to the wind creating some noise.

    This is a 100mm plastic vent, it is a white colour and has been treated to be safely placed outside.

    Features

    • Available in a number of sizes
    • Suitable for outside
    • Wall mount

    $18.00 $15.00
  • The vent and 12v light is a distinctive light incorporated into a circular diffuser vent suitable for showers and bathrooms. For use with inline fans only.
     
    The vent can be used within the splash area of your shower or bath and will provide a warm glow of soft light. This vent is to be used with inline systems only. The light is powered by remote SELV (safety extra low voltage) isolating transformer – THIS WILL NEED TO BE SUPPLIED BY YOUR INSTALLING ELECTRICIAN.

    5.00 out of 5
    $95.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 100mm diameter duct
    5.00 out of 5
    $30.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

     
    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

     
    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $16.00
  • The metal worm clamps are designed for fixing ductwork to inline motors. Clamps are a good substitute for traditional duct tape that may loose it's hold over time. Packs of two.

    4.50 out of 5
    $8.00
  • Metal joiners are used to join lengths of ducting together. Suitable for all types of ducting, can connect to a 100mm size.

    5.00 out of 5
    $9.00
  • This is a special order item – please allow 3-4 days for dispatch.

    A circular LVH44C intumescent fire damper (100mm diameter). The LVH44C damper comes fitted in a 360mm long metal sleeve. The intumescent grille combines air movement with fire protection. In everyday use, air can pass freely through the grille to allow good ventilation. In the event of a fire, the intumescent expands, fusing the grille into a solid barrier that stops fire spreading. Product is approved to AS1530.4 2014

    $99.00
  • A backdraft shutter is used with inline fans and duct, to stop air flowing in the “back” direction. It has “butterfly” wings and a very weak spring to minimise airflow reduction.
     
    Made of plastic and suitable to connect to 100mm ducting.

    $10.00
  • This form of semi rigid ducting holds it's shape and full diameter even when bends are applied. Temperature rating -70 degrees to +220 degrees. Perfect for rangehoods and clothes dryers.
     
    3m length

    4.00 out of 5
    $49.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    $48.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    $40.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    $45.00