Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 69 results

  • This basic rangehood accessory kit designed to exhaust through the roof – the kit consists of:
     
    1x 3m of 150mm semi rigid 'fire rated' ducting
    2x metal worm clamps 150mm
    1x Roof cowl kit 150mm (tiled roof dekite) – note colour of cowl kit is silver, not the dark colour shown in image

    *Installation by a professional is highly recommended* If you need more ducting we have extra 3m lengths listed as an accessory below.
     
    Roof Cowl Information:
    Roof Cowl Kits are designed for either metal or tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Ducting Information:
    Supplied with the most efficient type of flexible ducting – Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting. You can shorten ducting length with sharp knife if required. Conversely it can be extended with additional duct, sleeve and clamps.

    $219.00
  • This basic rangehood accessory kit designed to exhaust through the roof – the kit consists of:
     
    1x 3m of 150mm semi rigid 'fire rated' ducting
    2x metal worm clamps 150mm
    1x Roof cowl kit 150mm (metal roof) – note colour is silver, not the dark colour shown in image.

    *Installation by a professional is highly recommended* If you need more ducting we have extra 3m lengths listed as an accessory below.
     
    Roof Cowl Information:
    Roof Cowl Kits are designed for either metal or tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Ducting Information:
    Supplied with the most efficient type of flexible ducting – Semi-Rigid aluminium ducting holds its full diameter and form when bent into shape, and also offers a superior temperature range to that of flexible foil type ducting. You can shorten ducting length with sharp knife if required. Conversely it can be extended with additional duct, sleeve and clamps.

    $169.00
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise). This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 150mm diameter duct
    5.00 out of 5
    $59.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $79.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 150mm internal size.
     
    This insulated ducting is R1.5 rated. This is the highest rated insulated ducting that we can provide. R0.6 and R1.0 rating duct is available in separate listings.

    5.00 out of 5
    $89.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 150mm internal size.
     
    This insulated ducting is R1.0 rated. R0.6 and R1.5 rating duct is available in separate listings.

    4.00 out of 5
    $69.00
  • The Stainless Steel Mesh Vent is suitable for wall and ceiling installations. They are made of 304 grade Stainless Steel.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    $65.00
  • The 304 grade Stainless Hood vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.
     
    This vent also comes with a cinder mesh which makes it suitable for use in bush fire prone areas.

    $69.00
  • The 304 grade Stainless Dome vents are suitable for external wall installations. This style of vent provides a greater protection from the elements.

    This vent comes with a cinder mesh, which makes the vent suitable for installation in Bush Fire prone areas.

    5.00 out of 5
    $59.00
  • A modern internal vent designed to look like the popular ‘Chico’ exhaust fan by Fanco. The vent is a great solution if you are looking for a modern intake vent to be used in conjunction with inline fans. The modern, minimalistic look means that the vent is a very popular choice. This vent will connect to 150mm ducting.

    4.00 out of 5
    $45.00 $39.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    The listing is for a 300mm x 100mm boot that connects to 150mm flexible ducting.

    5.00 out of 5
    $19.00
  • This package includes a vent with gravity operated shutters (suitable for mounting on a wall, ceiling or eave) and 2m of 150mm diameter flexible ducting.
     
    It is usually used with ductable exhaust fans mounted on the ceiling and allows for exhausting air outside through a wall.
     
    The vent/grille is a white gravity vent that has been treated to be safely placed outside.

    $25.00
  • made in new zealandspec sheet

    The Fanco Frameless Extract Grille is a very stylish solution if you are looking for a completely flush mount internal vent. The vent can either be ceiling or side wall mounted and is suitable for plaster board or tiled ceilings and walls, in bathrooms, showers, laundries and kitchens.

     

    Framework or fixings are not visible. Once the unit is plastered in place the flexible duct is pulled down through the hidden frame and attached to the central plaque and spigot using a simple and completely invisible screwed fixing. The exposed surface of the plaque is level with the ceiling and with its white colour, can be painted.

     

    See the Dimensions Tab to view the fan when installed.

    $449.00 $295.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    A 300mm x 100mm high quality metal floor vent which provides a modern look.
     
    These floor vents have a smooth, fully closing damper operation with flush button control mechanism. The vent also comes with a 300mm x 100mm boot that can connect to 150mm flexible ducting.
     

    • Durable steel construction.
    • Attractive contemporary design.
    • Adjustable dampner.

    $45.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    A 300mm x 100mm high quality metal floor vent which provides a modern look.
     
    These floor vents have a smooth, fully closing damper operation with flush button control mechanism. The vent also comes with a 300mm x 100mm boot that connects to 150mm flexible ducting.
     

    • Durable steel construction.
    • Attractive contemporary design.
    • Adjustable dampner.

    $45.00