available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

  • Please note: a 350mm duct connecting spiggot is included with this vent. It is made to order and is approx 200mm deep and has a diameter of 350mm. As it is made to order the lead time can be approx 4-7 working days, please bear this in mind when ordering. We are also unable to accept returns for a ‘change of mind’ reason on this product.

  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 350mm diameter ducting. The rear boot will connect to 350mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    4.50 out of 5
  • This 6m length of flexible duct can be cut down to suit required length. For best airflow, it is recommended to keep the duct tight, as short as possible, avoid sharp turns and keep duct as round in shape (do not squash it).
    Choose the duct size to suit the exhaust fan and for best airflow, use same size or bigger duct than required by the fan.
    This is non-insulated ducting (please see alternative product listings for insulated ducting if required).

  • This is a special order item – please allow 3-4 days for dispatch.

    A circular LVH44C intumescent fire damper (350mm diameter). The LVH44C damper comes fitted in a 350mm long metal sleeve. The intumescent grille combines air movement with fire protection. In everyday use, air can pass freely through the grille to allow good ventilation. In the event of a fire, the intumescent expands, fusing the grille into a solid barrier that stops fire spreading. Product is approved to AS1530.4 2014

  • A backdraft shutter is used with inline fans and duct, to stop air flowing in the “back” direction. It has “butterfly” wings and a very weak spring to minimise airflow reduction.

    Made of metal, this backdraft shutter will connect to 350mm ducting if required.