Accessories

available accessories

We have a large selection of ventilation accessories including flexible ducting, insulated ducting, vents, grilles, controllers, remotes and plugs. If you are looking for accessories for a particular fan you wish to purchase from us, we have compiled a list of recommended accessories that go with each product which can be found at the bottom of most product pages.

You can use the category buttons below to narrow down your search for exhaust fan accessories. Alternatively all products are listed below the buttons (you can further narrow your search using the options available on the left sidebar).

Please be aware that some accessories will require installation by a qualified electrician, even if you are purchasing them to use in conjunction with a fan  which is otherwise suitable for a DIY install (has a lead and plug).

exhaust fan ventsvent and ducting kits
flexible ducting for exhaust fansbackdraft shutters for exhaust fan systems
joiners and reducers for inline exhaust systemsjunctions and bto's for exhaust fan systems
roof mounted roof cowl kitsother accessories for exhaust systems
rangehood duct kitsfloor vents

Display:  List Grid

Showing 1–24 of 64 results

  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • Edmonds General Purpose vent is ideal for a variety of vehicles and stationary locations. This includes vans, trucks, trailers, caravans, boats, small garden sheds, portable buildings and so on. It is entirely wind driven and helps to alleviate the discomfort of stuffy environments by improving the quality of the air and removing heat and odours from the vehicle. Made from impact resistant polymer and incorporating high carbon chromium steel ball bearings makes it durable. It is also weatherproof and simple to install.


    For dimensions and to view an installation diagram please see the dimensions tab below.

    $89.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 400mm diameter ducting. The rear boot will connect to 400mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small parts with shutters that can be opened and closed to a desired degree. This vent also comes with a connecting rear boot that will allow the vent to join up to 350mm diameter ducting. The rear boot will connect to 350mm flexible ducting. The boot is a rounded square shape, so solid round piping will not connect directly. This boot simply clips into the frame of the vent.

    4.00 out of 5
    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    $41.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 300mm diameter ducting. This boot simply clips into the frame of the vent.

    4.50 out of 5
    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 250mm diameter ducting. This boot simply clips into the frame of the vent.

    5.00 out of 5
    $35.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 250mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 2 way vent commonly used in conjunction with air conditioning systems. The vent has two small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 200mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 150mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • A plastic multi directional 4 way vent commonly used in conjunction with air conditioning systems. The vent has four small removable parts with shutters that can be opened and closed to a desired degree as well as positioned in any direction that you require. This vent also comes with a connecting rear boot that will allow the vent to join up to 200mm diameter ducting. This boot simply clips into the frame of the vent.

    $35.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    $35.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm round. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm Square. View more information including dimensions below:

    $59.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    $79.00
  • This listing is for a vent only – this product does not have a motor.

    This vent is designed to be used in conjunction with an inline motor. This product is designed to be ceiling mounted, plasterboard clips secure the unit in place. To install this vent a round 238mm diameter hole will need to be cut in the plasterboard. The face of the vent is 272mm square. View more information including dimensions below:

    5.00 out of 5
    $59.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    The listing is for a 300mm x 100mm boot that connects to 150mm flexible ducting.

    5.00 out of 5
    $19.00
  • Gravity vent designed for 250mm ducting. It has gravity flaps that opens up when the fan runs (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise).

    • Made of quality and durable plastic
    • Includes a backdraft shutter as well as the external gravity flaps
    • Includes easy plasterboard installation clips (see image of rear of vent).
    • Fascia Dimensions: 310x310mm (square)
    4.00 out of 5
    $69.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    A 300mm x 100mm plastic floor vent which provides a modern look, with slightly rounded corners.
     
    These floor vents have a smooth, fully closing damper operation with flush button control mechanism. The vent also comes with a 300mm x 100mm boot that connects to 150mm flexible ducting.
     

    • Super high strength – compared to polycarbonate vents.
    • Maintenance and Rust free.
    • Dishwasher safe.
    • 5 Year replacement warranty.

    $38.00
  • This product needs to be ordered in – please allow for an extra 2-3 working days on top of any orders that contain this item.
     
    A 300mm x 100mm plastic floor vent which provides a modern look, with slightly rounded corners.
     
    These floor vents have a smooth, fully closing damper operation with flush button control mechanism. The vent also comes with a 300mm x 100mm boot that connects to 150mm flexible ducting.
     

    • Super high strength – compared to polycarbonate vents.
    • Maintenance and Rust free.
    • Dishwasher safe.
    • 5 Year replacement warranty.

    $38.00