Ceiling Exhaust Fans

Choosing A Ceiling Exhaust Fan

When choosing a ceiling exhaust fan, use the following to help you:

  • Calculating the area of the room you wish to install the ceiling exhaust fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower. This will give you the approximate capacity (or airflow) required to ventilate the room.
  • Does the ceiling exhaust need to be ducted?
  • If it is replacing an existing fan, what hole cut-out size does it need to fit?

Once you have this information, use the interactive options on the left hand side to narrow your search to find your ceiling exhaust fan solution. Back to all exhaust fans.

Display:  List Grid

  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $129.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $224.00 $168.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $184.00 $138.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $149.00 $99.00
  •  

    Capacity: 88 m3/hr (24.44 l/s)
    Hole (Cutout) Size: 100mm Round
    Face Size: 152mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $165.00 $128.00
  •  

    Capacity: 88 m3/hr (24.44 l/s)
    Hole (Cutout) Size: 100mm Round
    Face Size: 152mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $129.00 $89.00
  • Capacity: 189 m3/hr (52.5 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 323mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Olson exhaust fan is a contemporary style exhaust fan with easy clean removable white fascia, fully enclosed motor with side duct and built in draft stopper. AC plug and lead included for easy DIY Installation. Also available in white and smaller 200mm sizes (listed separately).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $130.00 $69.00
  • Capacity: 480 m3/hr (133.33 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 325mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair High Capacity Jumbo exhaust fan is a modern square faced ceiling exhaust fan which fits a 295mm hole. These exhaust fans have a very high capacity and may be particularly well suited for larger bathrooms or kitchens.

    Not only does this fan look good, it also has a great airflow and is ductable.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $84.50
  • Capacity: 240 m3/hr (66.66 l/s)
    Hole (Cutout) Size: 296mm Round
    Face Size: 328mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The fan can be connected to 150mm ducting. This fan is also specifically engineered to maintain high airflow over long duct runs (refer to pressure curve for more info).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $119.00 $115.00
  • Capacity: 328 m3/hr (91.11 l/s)
    Hole (Cutout) Size: 296mm Round
    Face Size: 328mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The fan can be connected to 150mm ducting. This fan is also specifically engineered to maintain high airflow over long duct runs (refer to pressure curve for more info).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $129.00
  • Capacity: 240 m3/hr (66.66 l/s)
    Hole (Cutout) Size: 296mm Round
    Face Size: 328mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in black, silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The fan can be connected to 150mm ducting. This fan is also specifically engineered to maintain high airflow over long duct runs (refer to pressure curve for more info).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $119.00 $105.00
  • Capacity: 328 m3/hr (91.11 l/s)
    Hole (Cutout) Size: 296mm Round
    Face Size: 328mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The fan can be connected to 150mm ducting. This fan is also specifically engineered to maintain high airflow over long duct runs (refer to pressure curve for more info).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $129.00 $109.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $95.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $83.95
  • Capacity: 240 m3/hr (66.66 l/s)
    Hole (Cutout) Size: 245mm Square cut-out
    Face Size: 290mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    Martec’s Tetra Silver exhaust fan is a modernly designed exhaust fan with the option of ducting. It features a ball bearing motor with a whisper quiet operation.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $123.50 $77.50