Ceiling Exhaust Fans

Choosing A Ceiling Exhaust Fan

When choosing a ceiling exhaust fan, use the following to help you:

  • Calculating the area of the room you wish to install the ceiling exhaust fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower. This will give you the approximate capacity (or airflow) required to ventilate the room.
  • Does the ceiling exhaust need to be ducted?
  • If it is replacing an existing fan, what hole cut-out size does it need to fit?

Once you have this information, use the interactive options on the left hand side to narrow your search to find your ceiling exhaust fan solution. Back to all exhaust fans.

Display:  List Grid

Showing 1–24 of 31 results

  • Capacity: 270 m3/hr (75 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Square
    Motor Height: 194mm
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Metro PRO is a high capacity ceiling mounted exhaust fan that comes with an ultra modern low profile cover.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.80 out of 5
    $109.00 $79.00
    PRE-SALE
    ETA Late October
  • Capacity: 270 m3/hr (75 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Luna PRO is a high capacity ceiling mounted exhaust fan that comes with an ultra modern low profile cover.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $109.00 $79.00
    PRE-SALE
    ETA Late October
  • Capacity: 270 m3/hr (75 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Luna LED is a high capacity ceiling mounted exhaust fan that comes with a central LED light and an ultra modern low profile cover. The LED light is a high quality 4200k cool white. The 11w central downlight produces 800 lumens and a beam angle of 100 degrees.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.50 out of 5
    $139.00 $99.00
  • panasonic ductable fanspec sheetCapacity: 158 m3/hr (44 l/s)
    Face Size: 300mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Panasonic FV-24JR2 is a high quality DC (direct current) ceiling exhaust fan packed with some wonderful features. The fan consumes only 8w on high speed at only 31 dB(A). The unit has a built in 15 minute run on timer, no external timer is required. The fan also features a clever 24 hour setting, which can be configured by the end user and allows for the fan to operate continuously on a setting which only consumes 3.6w at 20 dB(A). Perfect for areas suffering from mould or moisture issues as the unit will provide round the clock ventilation very quietly. This model also features a motion sensor. This means the fan will automatically switch on when you enter the room and off when you leave. Read more about the fan below:


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.50 out of 5
    $399.00 $379.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Light: 15w LED (Natural White 4500K)
    Hole (Cutout) Size: 250mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Mercator Skyline is a compact exhaust fan and light. Includes 2 lead and plugs (1 for fan and 1 for light). This fan has a white trim with a frosted glass middle. The Skyline is a low capacity quiet model best suited for small bathrooms or toilets that require a fan with integrated light.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $139.00
  • Capacity: 146 m3/hr (40.56 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Ovation exhaust fan is a contemporary style exhaust fan with easy clean removable white fascia, fully enclosed motor with side duct and built in draft stopper. AC plug and lead included for easy DIY Installation. Also available in silver and larger 250mm sizes (listed separately).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.50 out of 5
    $100.00 $69.00
  • Capacity: 189 m3/hr (52.5l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 327mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Sierra exhaust fan is low profile with a white finish, it contains an easy to remove fascia to be taken off conveniently when cleaning. The Sierra has a quality made 30w ball bearing motor and built in back draft stopper. This exhaust fan is suitable for small sized toilets and bathrooms, producing a low noise level when in operation. Includes is a lead and plug suitable for DIY installation.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $89.00
  •  Capacity: 240 m3/hr (66.66 l/s)
    Hole (Cutout) Size: 245mm Square cut-out
    Face Size: 290mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    Martec’s Tetra Silver exhaust fan is a modernly designed exhaust fan with the option of ducting. It features a ball bearing motor with a whisper quiet operation.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.50 out of 5
    $112.99 $72.99
    PRE-SALE
    ETA Early November
  • Capacity: 144 m3/hr (40 l/s)
    Hole (Cutout) Size: 230mm Square
    Face Size: 280mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Polyaire Derby exhaust fan is a compact, efficient ‘all in one’ ducted ventilator complete with non-return damper and 90 degree takeoff for easy installations in tight areas. Popular for use in bathrooms, toilets and laundries. Can also be used for short heat shifter applications.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $89.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in black, silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $109.00 $95.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $95.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $95.00
  • Capacity: 152 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 200 is a low profile side ducted exhaust fan. This fan comes with a high quality long-life ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. This Airbus is ideal for short duct runs. For more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $120.00
  • Capacity: 152 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 200 is a low profile side ducted exhaust fan. This fan comes with a high quality long-life ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. This Airbus is ideal for short duct runs. For more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $120.00
  • Capacity: 550 m3/hr (153 l/s)
    Hole (Cutout) Size: 296mm Round
    Face Size: 326mm x 326mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 300 is a low profile, side ducted exhaust fan available in with a round or square fascia. This fan comes with a high quality ball bearing motor. It also includes a backdraft shutter and lead and plug for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.78 out of 5
    $175.00 $148.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $99.00 $77.00
  • Capacity: 500 m3/hr (138.88 l/s)
    Hole (Cutout) Size: 235mm Round
    Face Size: 270mm Round
    Ductable: No (Unit will simply blow into the roofspace)
    View full technical specs further down the page


    The Whisper 240 is a high capacity non-ductable ceiling exhaust fan that features a backdraft shutter to prevent cold air coming back into the bathroom when the fan is not in operation; and easy installation clamps making it incredibly easy to install.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $49.00
  • Capacity: 284 m3/hr (78.88 l/s)
    Hole (Cutout) Size: 241mm Round
    Face Size: 290mm Round
    Ductable: No (Unit will simply blow into the roofspace)
    View full technical specs further down the page


    The Lenco ceiling mounted exhaust fan is a 200mm non-ductable exhaust fan that is suitable for ceiling mounting ONLY. This Lenco fan comes with a quality ball bearing motor and is not designed to be connected to ducting. As with most non-ductable fans it is advisable to allow for 50cm of space above the fan.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $49.50
  • Capacity: 260 m3/hr (72.22 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 305mm Round
    Ductable: No (Unit will simply blow into the roofspace)
    View full technical specs further down the page


    Designed to fit discreetly into cavity type ceilings, Airflow low profile Exhaust Fans are ideal for bathrooms, kitchens, laundries and toilets. The slimline, flyproof grille has been designed for easy cleaning. Simply snap off the grille and place it in the dishwasher.

    Unique patented sliding mounting clips provide easy installation by one person. The design also allows for direct screw fixing. Heavy-duty continuous rated ball bearing motors are standard.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $45.00
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in black, silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $93.95
  • Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 272mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus is a low profile side ducted exhaust fan available in either silver or white. This fan comes with a high quality ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. The Airbus has been designed for longer duct runs, for more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $99.00 $83.95
  • Capacity: 152 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 200 is a low profile side ducted exhaust fan. This fan comes with a high quality long-life ball bearing motor and stylish round glass fascia. A backdraft shutter and lead and plug is included for easy installation. This Airbus is ideal for short duct runs. For more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $130.00
  • Capacity: 152 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 200 is a low profile side ducted exhaust fan. This fan comes with a high quality long-life ball bearing motor and stylish round glass fascia. A backdraft shutter and lead and plug is included for easy installation. This Airbus is ideal for short duct runs. For more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $130.00
  • Capacity: 152 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 240mm Round
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Ventair Airbus 200 is a low profile side ducted exhaust fan. This fan comes with a high quality long-life ball bearing motor. A backdraft shutter and lead and plug is included for easy installation. This Airbus is ideal for short duct runs. For more information please refer to the pressure curve below.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $120.00