Wall Exhaust Fans


wall exhaust fans


quiet wall mounted exhaust fan sale


Wall Fan – How To Choose A Wall Exhaust Fan

Wall fans are popular for all domestic applications (bathroom, kitchens, laundry areas), particularly where ceiling/roof space is limited. The wall fan motor is either positioned inside the room, or on the outside wall (both are typically ducted), providing both a suitable exhaust capacity with an aesthetically pleasing appearance. There are a few factors to keep in mind when choosing a wall exhaust fan:

  • Calculating the area of the room you wish to install the wall fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower). This will give you the approximate capacity (or airflow) required to ventilate the room.
  • If it is replacing an existing wall fan, what hole cut-out size does it need to fit?

Browse our large range of wall exhaust fans below or use the intuitive ‘Narrow Your Search’ function on the left hand side:

Display:  List Grid

  • spec sheet
    Capacity: 750 m3/hr (208 l/s)
    Hole (Cutout) Size: 175mm
    Face Size: 430 x 360mm
    Motor Type: Centrifugal
    Ductable: Yes
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller. This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required. View more technical information below or click on the red pdf button to download a detailed spec sheet.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $439.00
  • spec sheetCapacity: 600 m3/hr (166.66 l/s)
    Motor Type: Centrifugal
    Hole Size: 155mm round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $319.00 $285.00
    PRE-SALE
    ETA Early June
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $224.00 $168.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $214.00 $158.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 240mm Square – Face protrudes approx 56mm from wall to cover
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The IP24 rated LD Auto features a modern design and aesthetic look with an attractive square fascia. This unit is ideal for bathroom, showers, kitchens and other utility spaces. The built in auto shutter provides automatic opening/closing once the unit is turned on/off. The impeller design enhances the fan efficiency and prolongs the motor service life. This fan is well suited for walls with limited cavity space – the flange requires only 81mm. This is because the motor is situated behind the front cover, this means that the protrusion from wall to cover is 56mm. For more information take a look at the dimensions diagram in the image gallery.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $149.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 240mm Square – Face protrudes approx 56mm from wall to cover
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The IP24 rated LD Auto features a modern design and aesthetic look with an attractive square fascia. This unit is ideal for bathroom, showers, kitchens and other utility spaces. This model has an inbuilt run on timer and can be set to continue operating for 2-30 mins after turning the unit off. The built in auto shutter provides automatic opening/closing once the unit is turned on/off. The impeller design enhances the fan efficiency and prolongs the motor service life. This fan is well suited for walls with limited cavity space – the flange requires only 81mm. This is because the motor is situated behind the front cover, this means that the protrusion from wall to cover is 56mm. For more information take a look at the dimensions diagram in the image gallery.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $169.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $129.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $179.00 $119.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 156mm Round
    Face Size: 215mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Punto is available in 100mm, 120mm and 150mm sizes. Suitable for wall or ceiling installation. If you wish to install the fan in a ceiling you will need to purchase the ceiling mount kit listed below. Its made of soft rubber and is designed to maintain the IP rating of the fan. This model comes with Auto Shutters: In this version the shutters, made from shockproof, anti-UV-treated plastic, positioned behind the front grille automatically open and close slowly when the unit is operated.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $329.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 156mm Round
    Face Size: 215mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Punto is available in 100mm, 120mm and 150mm sizes. Suitable for wall or ceiling installation. If you wish to install the fan in a ceiling you will need to purchase the ceiling mount kit listed below. Its made of soft rubber and is designed to maintain the IP rating of the fan.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $189.00
  • Capacity: 335 m3/hr (93.05 l/s)
    Hole (Cutout) Size:156mm Round
    Face Size: 214mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Filo is available in 100mm, 125mm and 150mm sizes. Suitable for wall or ceiling installation. The Filo models also feature a built in back draft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $229.00 $179.00
  • Capacity: 210 m3/hr (58.33 l/s)
    Hole (Cutout) Size:148mm Round
    Face Size: 209mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Ventair Slimline VSLF150 is a versatile wall, ceiling or window slimline exhaust fan with compact body design. Ideal for small install spaces. Window kit and back-draft shutter included.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $69.00 $67.00
  • Capacity: 292 m3/hr (81.11 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 205mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The S Series exhaust fan model is a compact yet capable exhaust fan featuring a simple design. Suitable for small sized household bathrooms and laundries as the fan has a capacity of 293 m3/hr and comes with a fly screen which is easily removed. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $134.00 $98.00
  • Capacity: 292 m3/hr (81.11 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 205mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The S Series exhaust fan model is a compact yet capable exhaust fan featuring a simple design. Suitable for small sized household bathrooms and laundries as the fan has a capacity of 293 m3/hr and comes with a fly screen which is easily removed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $115.00 $59.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting. This unit comes with automatic shutters that lock open while fan is operating, then lock shut when fan is switched off. Automatic shutters prevent cool drafts and insects from entering, as well as hot air from escaping. This model includes automatic shutters and an in-built timer.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $309.00 $299.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting. This unit comes with automatic shutters that lock open while fan is operating, then lock shut when fan is switched off. Automatic shutters prevent cool drafts and insects from entering, as well as hot air from escaping.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $249.00 $235.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $225.00 $210.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made E-style wall exhaust is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a running light on the face cover. This listing is for the 12v fan with transformer. The model with 12v transformer is only suitable for hardwiring – it cannot be used with a battery or solar power.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $199.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This product will need to be hardwired by an electrician – for this reason we cannot install a lead and plug to this fan.

    This E-style with built in adjustable run on Timer is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a ‘running light’ on the face cover.

    *Comes with up to 25 minute timer delay.*


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $159.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This product will need to be hardwired by an electrician – for this reason we cannot install a lead and plug to this fan.

    This E-style with humidity sensor and Timer is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a ‘running light’ on the face cover.

    *Comes with up to 25 minute timer delay and adjustable humidity sensor with control from 40 to 80% of R.H. The Humidity Sensor is designed for use in a laundry or bathroom where humidity is generated by the use of appliances.*Humidity Sensor location is bottom of face-plate – left of center (see picture).


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $199.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made E-style wall exhaust is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a running light on the face cover.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $149.00 $119.00
  • Capacity: 315 m3/hr (87.5 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 214mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Quiet 150 is a ceiling or wall mounted exhaust fan which has been specifically engineered to operate quietly. The unit has a capacity of 315m3/hr, it is a two speed motor and on the low speed the unit has a capacity of 220m3/hr. The desired capacity is achieved by wiring the fan to the relevant speed setting. This fan is relatively unique as it has anti vibration technology which helps to further reduce noise generated from the motor.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.67 out of 5
    $249.00 $159.00