Wall Exhaust Fans


wall exhaust fans


quiet wall mounted exhaust fan sale


Wall Fan – How To Choose A Wall Exhaust Fan

Wall fans are popular for all domestic applications (bathroom, kitchens, laundry areas), particularly where ceiling/roof space is limited. The wall fan motor is either positioned inside the room, or on the outside wall (both are typically ducted), providing both a suitable exhaust capacity with an aesthetically pleasing appearance. There are a few factors to keep in mind when choosing a wall exhaust fan:

  • Calculating the area of the room you wish to install the wall fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower). This will give you the approximate capacity (or airflow) required to ventilate the room.
  • If it is replacing an existing wall fan, what hole cut-out size does it need to fit?

Browse our large range of wall exhaust fans below or use the intuitive ‘Narrow Your Search’ function on the left hand side:

Display:  List Grid

  • spec sheet
    Capacity: 750 m3/hr (208 l/s)
    Hole (Cutout) Size: 175mm
    Face Size: 430 x 360mm
    Motor Type: Centrifugal
    Ductable: Yes
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller. This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required. View more technical information below or click on the red pdf button to download a detailed spec sheet.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $439.00
  • Capacity: 185 m3/hr (51.38 l/s)
    Wall Hole (Cutout) Size: 130mm Round
    Window Hole (Cutout) Size: 150mm – 160mm Round
    Face Size: 186mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    A capable exhaust fan with a simple design and can be mounted on a window or a thin panel wall. It is available in two sizes. The Valerie Window fan needs to be hardwired by an electrician unless a lead and plug is installed. This fan comes with electric shutters which close the inside cover when the fan is not in operation.

     

    If you intend to use this fan as a wall mounted fan the easiest thing to do is to discard the provided rear and replace this with a more suitable external vent.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    5.00 out of 5
    $225.00 $129.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Wall Hole (Cutout) Size: 155mm Round
    Window Hole (Cutout) Size: 175mm – 194mm Round
    Face Size: 210mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    A capable exhaust fan with a simple design and can be mounted on a window or a thin panel wall. It is available in two sizes. The Valerie Window fan needs to be hardwired by an electrician unless a lead and plug is installed. This fan comes with electric shutters which close the inside cover when the fan is not in operation.

     

    If you intend to use this fan as a wall mounted fan the easiest thing to do is to discard the provided rear and replace this with a more suitable external vent.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    5.00 out of 5
    $229.00 $149.00
  • Capacity: 210 m3/hr (58.33 l/s)
    Hole (Cutout) Size: 183mm – 188mm Round
    Face Size: 214mm Round
    Ductable: No
    View full technical specs further down the page


    This HCM Exhaust fan is suitable for applications ranging from domestic kitchens, bathrooms, commercial offices and all types of small or confined areas. All HCM Exhaust Fans are of compact low profile design and have weather and impact resistant plastic housings with integral air operated shutters. Impellers are sickle shaped for high performance. Motors are shaded-pole induction motor with sleeve bearings.

     

    Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube. These products are listed below as accessories:


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    $210.00
  • Exhaust Capacity: 235 m3/hr (65.27 l/s)
    Hole (Cutout) Size: 185mm – 190mm Round
    Face Size: 215mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. This model comes with a pull cord, which means the unit is switched on/off by pulling the cord down. The fan is a low noise, high quality product.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $219.00
  • Exhaust Capacity: 235 m3/hr (65.27 l/s)
    Supply Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 185mm – 190mm Round
    Face Size: 215mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts, the shutters are positioned behind the front grille automatically open and close slowly when the unit is operated. This model can also be wired to operate in reverse if required, meaning it can either be configured to supply or exhaust, depending on your requirements.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    5.00 out of 5
    $225.00
  • spec sheet
    Capacity: 380 m3/hr (106 l/s)
    Hole (Cutout) Size: 150mm round
    Face Size: 345 x 262mm
    Motor Type: Centrifugal
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller.
    This Vortice External Wall Mounted Centrifugal Fan is ideal for kitchens, bathrooms, storage areas, cellars, bars, fitness centres, workplaces and shops. It is a solution suitable for those spaces where more than one room requires centralised extraction. This fan has a two speed option, has steel housing and utilises long-life polyester paint. In order to stop air returning the room there is also an automatic close function.
    View more technical information below or click on the red pdf button to download a detailed spec sheet.

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $399.00
  • spec sheetCapacity: 468 m3/hr (140 l/s)
    Motor Type: Centrifugal
    Hole Size: 155mm round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Architects Choice externally mounted fan by Fanco Australia is a high quality fan designed and manufactured in New Zealand. The fan is powered by a high quality German 'ZIEHL-ABEGG' 3 speed motor. The motor offers a high performance 140 Lts/sec rated @ 50,000 hrs with an IP55 rating. The fan can be connected to 150mm diameter ducting and is a great solution for bathroom, kitchen or laundry ventilation. The fan can be wired to a 3 speed positional controller (listed below), please note an electrician is required to install this item.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $699.00 $649.00
  • spec sheetCapacity: 600 m3/hr (166.66 l/s)
    Motor Type: Centrifugal
    Hole Size: 155mm round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $319.00 $285.00
  • Capacity: 360 m3/hr (100 l/s)
    Hole (Cutout) Size: 170mm – 210mm Round
    Face Size: 245mm Square
    Ductable: No
    View full technical specs further down the page


    The Maxair exhaust wall fan features electric shutters to prevent back drafts. This product is supplied with an external grille and duct to join. Please note that auto-shutters will take approximately 30 seconds to open and close. This model also comes with a pull cord which hangs from the bottom of the motor, allowing for convenient on/off operation.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    5.00 out of 5
    $335.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 156mm Round
    Face Size: 215mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Punto is available in 100mm, 120mm and 150mm sizes. Suitable for wall or ceiling installation. If you wish to install the fan in a ceiling you will need to purchase the ceiling mount kit listed below. Its made of soft rubber and is designed to maintain the IP rating of the fan. This model comes with Auto Shutters: In this version the shutters, made from shockproof, anti-UV-treated plastic, positioned behind the front grille automatically open and close slowly when the unit is operated.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $329.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 156mm Round
    Face Size: 215mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Punto is available in 100mm, 120mm and 150mm sizes. Suitable for wall or ceiling installation. If you wish to install the fan in a ceiling you will need to purchase the ceiling mount kit listed below. Its made of soft rubber and is designed to maintain the IP rating of the fan.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00
  • Capacity: 335 m3/hr (93.05 l/s)
    Hole (Cutout) Size:156mm Round
    Face Size: 214mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made Filo is available in 100mm, 125mm and 150mm sizes. Suitable for wall or ceiling installation. The Filo models also feature a built in back draft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $229.00 $179.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting. This unit comes with automatic shutters that lock open while fan is operating, then lock shut when fan is switched off. Automatic shutters prevent cool drafts and insects from entering, as well as hot air from escaping. This model includes automatic shutters and an in-built timer.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $309.00 $299.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting. This unit comes with automatic shutters that lock open while fan is operating, then lock shut when fan is switched off. Automatic shutters prevent cool drafts and insects from entering, as well as hot air from escaping.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $249.00 $235.00
  • Capacity: 280 m3/hr (77.77 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 200mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This series of fans can be used as ceiling or wall fans and can be connected to short lengths of ducting.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $225.00 $210.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made E-style wall exhaust is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a running light on the face cover. This listing is for the 12v fan with transformer. The model with 12v transformer is only suitable for hardwiring – it cannot be used with a battery or solar power.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $199.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This product will need to be hardwired by an electrician – for this reason we cannot install a lead and plug to this fan.

    This E-style with built in adjustable run on Timer is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a 'running light' on the face cover.

    *Comes with up to 25 minute timer delay.*


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $165.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This product will need to be hardwired by an electrician – for this reason we cannot install a lead and plug to this fan.

    This E-style with humidity sensor and Timer is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a 'running light' on the face cover.

    *Comes with up to 25 minute timer delay and adjustable humidity sensor with control from 40 to 80% of R.H. The Humidity Sensor is designed for use in a laundry or bathroom where humidity is generated by the use of appliances.*


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $219.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    This product will need to be hardwired by an electrician – for this reason we cannot install a lead and plug to this fan.

    This E-style with PIR movement sensor and Timer is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a 'running light' on the face cover.

    *Comes with passive infra-red sensor to automatically activate the fan when movement is detected. Once fan turns on in continues to run for preset period as per timer setting.*


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $219.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 220mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Italian made E-style wall exhaust is suitable for wall or ceiling installation. The E-style models have a built in back draft shutter and a running light on the face cover.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $149.00 $135.00
  • Capacity: 315 m3/hr (87.5 l/s)
    Hole (Cutout) Size: 155mm Round
    Face Size: 214mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Quiet 150 is a ceiling or wall mounted exhaust fan which has been specifically engineered to operate quietly. The unit has a capacity of 315m3/hr, it is a two speed motor and on the low speed the unit has a capacity of 220m3/hr. The desired capacity is achieved by wiring the fan to the relevant speed setting. This fan is relatively unique as it has anti vibration technology which helps to further reduce noise generated from the motor.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.67 out of 5
    $249.00 $159.00
  • Capacity: 360 m3/hr (100 l/s)
    Hole (Cutout) Size: 170mm – 210mm Round
    Face Size: 245mm Square
    Ductable: No
    View full technical specs further down the page


    The Maxair exhaust wall fan features electric shutters to prevent back drafts. This product is supplied with an external grille and duct to join. Please note that auto-shutters will take approximately 30 seconds to open and close.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $310.00
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)