Product Accessories & Parts

Display:  List Grid

Showing 1–24 of 58 results

  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves. The neck is a fixed 150mm diameter. It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    5.00 out of 5
    $20.00 $15.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 250mm internal size.
     
    This insulated ducting is R1.5 rated. R0.6 and R1.0 rating duct is available in separate listings.

    5.00 out of 5
    $109.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 200mm internal size.
     
    This insulated ducting is R1.5 rated. R0.6 and R1.0 rating duct is available in separate listings.

    5.00 out of 5
    $99.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 150mm internal size.
     
    This insulated ducting is R1.5 rated. This is the highest rated insulated ducting that we can provide. R0.6 and R1.0 rating duct is available in separate listings.

    5.00 out of 5
    $89.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 150mm internal size.
     
    This insulated ducting is R1.0 rated. R0.6 and R1.5 rating duct is available in separate listings.

    4.00 out of 5
    $69.00
  • A 600m duct silencer for those cases where extra reach is needed.

    This silencer ducting can be applied for noise absorption. It absorbs sound produced during the ventilating equipment operation and spread along the ducting systems. Suitable for installation into round ducts.

    The SRP silencer consists of internal flexible duct made of micro-perforated aluminum foil and laminated with polyether film. The ducts are reinforced by the high-carbon steel wire and outer polyethylene sleeve. The Silencer is supplied with high quality 25 mm sound insulation material. The silencer is equipped with the connecting flanges with rubber sealing that provides the airtight connection to the air ducts.

    $69.00
  • A 600mm length of silencer duct for those cases where extra reach is needed.

    600mm silencer duct, 200mm internal size.

    This silencer ducting can be applied for noise absorption. It absorbs sound produced during the ventilating equipment operation and spread along the ducting systems. Suitable for installation into round ducts.

    $79.00
  • A 6m length of insulated duct for those cases where extra reach is needed.
     
    6m Flexible Insulated duct, 200mm internal size.
     
    This insulated ducting is R1.0 rated. R0.6 and R1.5 rating duct is available in separate listings.

    5.00 out of 5
    $79.00
  • Size: 250mm x 250mm x 250mm

    For branch connections of the air ducts used in residential, public and industrial ventilation systems.

    For connection of various air ducts and their integration into complex ventilation systems.

    Important notice: The shape of the product supplied may not always be as pictured – the image shows a Y piece however you may be supplied with a branch take off. Either way the product will function as required

    4.00 out of 5
    $39.00
  • Size: 150mm x 100mm x 100mm

    For branch connections of the air ducts used in residential, public and industrial ventilation systems.

    For connection of various air ducts and their integration into complex ventilation systems.

    Important notice: The shape of the product supplied may not always be as pictured – the image shows a Y piece however you may be supplied with a branch take off (see gallery picture). Either way the product will function as required

    $19.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This plastic reducer will reduce from 200mm to 150mm.

    5.00 out of 5
    $11.00
  • Size: BTO 200mm x 200mm x 150mm

    For branch connections of the air ducts used in residential, public and industrial ventilation systems.

    For connection of various air ducts and their integration into complex ventilation systems.

    Important notice: The shape of the product supplied may not always be as pictured – the image shows a Y piece however you may be supplied with a branch take off (see additional gallery image). Either way the product will function as required

    $35.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This reducer will reduce from 250mm to 200mm.

    $19.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This reducer will reduce from 300mm to 250mm.

    4.00 out of 5
    $20.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $20.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

     
    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.

     
    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $16.00
  • The metal worm clamps are designed for fixing ductwork to inline motors. Clamps are a good substitute for traditional duct tape that may loose it's hold over time. Packs of two.

    $12.00
  • The metal worm clamps are designed for fixing ductwork to inline motors. Clamps are a good substitute for traditional duct tape that may loose it's hold over time. Packs of two.

    $10.00
  • The metal worm clamps are designed for fixing ductwork to inline motors. Clamps are a good substitute for traditional duct tape that may loose it's hold over time. Packs of two.

    $9.00
  • The metal worm clamps are designed for fixing ductwork to inline motors. Clamps are a good substitute for traditional duct tape that may loose it's hold over time. Packs of two.

    4.50 out of 5
    $8.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This metal reducer will reduce from 250mm to 200mm.

    5.00 out of 5
    $35.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This metal reducer will reduce from 200mm to 150mm.

    $30.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This metal reducer will reduce from 350mm to 300mm.

    $55.00
  • Reducers are used when it is necessary to change the duct size to either a larger or smaller duct. This metal reducer will reduce from 300mm to 250mm.

    $45.00