VCN External Centrifugal Fan 200mm

$335.00 $295.00

Save:11.9%
Purchase this product and earn 295 Points


0 review  |  Write a review

spec sheetCapacity: 710 m3/hr (197.22 l/s)
Motor Type: Centrifugal
Hole Size: 205mm round
Ductable: Yes (200mm duct diameter)
View full technical specs further down the page


The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

 

This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.

Model Number

EWVUVCN4

Colour

Grey

Material

Metal

Hole Size

205mm

Capacity (m3/hr)

710 m3/hr

Capacity (L/S)

197.22 L/S

Recommended Room Size (Based on Achieving 15 air changes per hour)

47.3 m3

Motor Power (Wattage)

100w

Noise Level

62 dB(A)

IP Rating

IPX4

Max Operating Temperature

55 °C

Voltage

230

Installation

This fan requires hardwiring by an electrician

Installation Location

External Wall

Includes Backdraft Shutter

No

Ductable?

Ductable

Duct Location

Rear Ducted

Duct Size

200mm

Motor RPM

2600

Motor Type

Centrifugal

Capacity Disclaimer

All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible

Room Size Recomendation Disclaimer

As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice.

Warranty

The manufacturer offers a 2 year replacement warranty (conditions apply).

VCN external
VCN external

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Installation - All electrical goods must be installed by a licensed electrician unless they are DIY products (e.g. with lead and plug).

Prices - All prices are in AU$ and inclusive of GST.

Trade Pricing - We offer a 5% discount on orders with 5+ quantity of any single item, or orders $1,000+

Delivery Method - While we do not have a showroom, all products are listed in detail on our website. If you have any further questions, please contact us. Our warehouse is not currently set-up to accommodate pick-ups, we do however dispatch promptly with reliable post and courier services Australia wide. If you need urgent delivery, please contact us prior to purchasing to get an estimate delivery time and delivery options.

Delivery Cost - Most orders over $300 will qualify for free delivery, however some rural and remote areas may not be included. To check if your postcode qualifies, simply add the item(s) to the Cart where you can input your State and Postcode to calculate shipping. For further and more detailed shipping information, click here.

Accessories…

  • The Speed controller is used for smooth speed control of domestic fans. Controller must be placed in the mounting box.

    Basic Technical Specification

    • Supply Voltage 230v, 50/60Hz
    • Output power, not more than 300w (load current not more than 1.8a)
    • Overall Dimensions, not more than 78x78x63mm
    • Weight, not more than 0.11kg
    • IP40 Rated

    The controller casing is made of plastic. The controller is featured with high efficiency and control accuracy. Switching to the maximum speed is effected by means of regulating the control knob. Regulating starts from the minimum to the maximum voltage value for the fan stable running. The minimum speed is set by means of the potentiometer at PCB. Controller must be installed onto vertical wall in hidden or external mounting box inside premises.

    4.00 out of 5
    $69.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    $35.00
  • Size: 200mm x 200mm x 200mm

    For branch connections of the air ducts used in residential, public and industrial ventilation systems.

    For connection of various air ducts and their integration into complex ventilation systems.

    Important notice: The shape of the product supplied may not always be as pictured – the image shows a Y piece however you may be supplied with a branch take off (see additional gallery image). Either way the product will function as required

    $35.00
  • This 6m length of flexible duct can be cut down to suit required length. For best airflow, it is recommended to keep the duct tight, as short as possible, avoid sharp turns and keep duct as round in shape (do not squash it).
     
    Choose the duct size to suit the exhaust fan and for best airflow, use same size or bigger duct than required by the fan.
     
    This is non-insulated ducting (please see alternative product listings for insulated ducting if required).

    5.00 out of 5
    $32.00 $22.00
  • An inside vent/grille for use with exhaust fans. Typically this vent would be installed on the ceiling and has an adjustable airflow meaning you can rotate the center of the unit to open or restrict airflow.

    5.00 out of 5
    $32.00
  • An inside vent/grille for use with exhaust fans. It is normally placed on the ceiling or wall.

    It comes in different sizes, to match the duct used, and the air flow is adjustable: the centre part is rotated clockwise or anti-clockwise to open or restrict airflow.

    Features
    Available in a number of sizes
    Adjustable airflow
    Suitable for Ceiling or Wall mounting
    304 Grade Stainless Steel

    $109.00
  • A vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.
     
    It is a white colour and has been treated to be safely placed outside, it also comes with a built-in flyscreen.
     
    Features

    • Suitable for outside
    • Wall, ceiling, eave mount

    $25.00
  • An inside vent/grille for use with exhaust fans. It is normally placed on the ceiling or wall.

    It comes in different sizes, to match the duct used, and the air flow is adjustable: the center part is rotated clockwise or anti-clockwise to open or restrict airflow. It comes in a white colour.

    Features

    • Available in a number of sizes
    • Adjustable airflow
    • Suitable for Ceiling or Wall mounting

    $40.00 $35.00
  • An inside vent/grille for use with exhaust fans. It is normally placed on the ceiling or wall.

    This cone vent comes in different sizes, to match the duct used, and the air flow is adjustable: the centre part is rotated clockwise or anti-clockwise to open or restrict airflow. It comes in a white colour.

    Features

    • Available in a number of sizes
    • Adjustable airflow
    • Suitable for Ceiling or Wall mounting

    $58.00 $45.00
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)