BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
Brilliant Solace with Fan Forced Heater & LED Light – White
Rated 5.00 out of 5 based on 6 customer ratings
$329.00 Original price was: $329.00.$199.00Current price is: $199.00.
SKU: ECBRSOWH
Categories: 3 in 1 Bathroom Exhaust Fans, Brilliant Exhaust Fans, Exhaust Fan With Heat And Light, Exhaust Fans
| Extraction Rate | 240 m3/hr (66.66 l/s) |
|---|---|
| Hole (Cutout) Size | 350mm x 350mm |
| Light | 12w 4200k LED Light |
| Heat | 2140w Fan Forced Heater |
| Ductable? | Yes (100mm duct diameter) |
The all new Brilliant Solace (model number 21476/05) delivers a modern and slimline appearance that suits most bathroom and ensuites. The powerful fan forced heater is designed to quickly provide warmth to the whole room, unlike traditional heat globes that are only designed to provide heat directly below. Alternatively use the fan without the heater to create a gentle breeze on those warm days. The Solace also incorporates an exhaust fan and LED light, making it the total bathroom solution.
• Compact, low profile design
• Powerful 35W long life ball bearing exhaust fan motor
• Extracts up to 240 m3/hr
• Energy saving 12W cool white LED light (900 lumens)
• Create a cooling breeze for warmer climates by utilising the fan only option without the heater
• 100mm diameter side duct outlet with draft stopper
• Includes wall switch, 1.5m of flexible ducting and exterior grille
• Operating Voltage: 240V / 50Hz
• Two levels of heating (HEAT I 1000W / HEAT II 2140W). Selectable via wall switch.
Controls
Note with this unit it is not possible to have the exhaust fan and heater running at the same time. On the wall control there is a central switch FAN / EXHAUST. Switching to exhaust provides extraction, switching to fan engages the fan forced element to provide cool or warm air. See gallery for image of supplied wall controller.
Heating:
Step1: Turn ‘ON/OFF’ button on.
Step2: Switch button to ‘Fan’ and turn ‘Heat I or Heat II’ on.
Note: When Heat I and Heat II are turned on, full heating is applied.
Fan (to provide cool air into bathroom):
Step1: Turn ‘ON/OFF’ button on
Step2: Switch button to ‘Fan’ to blow air in to the room
Exhaust:
Step1: Turn ‘ON/OFF’ button on
Step2: Switch button to ‘Exhaust’
LED Light:
Operate the LED light independently from heater, using the ‘Light’ switch button
| Manufacturer | Brilliant |
|---|---|
| Model Number | 21476/05 |
| Colour | White |
| Material | Plastic |
| Hole Size | 350mm x 350mm |
| Type of Light | LED |
| Capacity (m3/hr) | 240 m3/hr |
| Capacity (L/S) | 66.66 L/S |
| Recommended Room Size (Based on Achieving 15 air changes per hour) | 16 m3 |
| Motor Power (Wattage) | 35w |
| Minimum Install Depth | 355mm |
| Noise Level | No Figures Published |
| IP Rating | IPX2 |
| Installation | This fan requires hardwiring by an electrician |
| Installation Location | Ceiling |
| Ductable? | Ductable |
| Duct Location | Side Ducted |
| Duct Size | 100mm |
| Warranty | Brilliant – The manufacturer offers a 3 year replacement warranty (conditions apply) |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
