Commercial Exhaust Fans

commercial exhaust fans

Choosing A Commercial Exhaust Fan

Commercial exhaust fans are perfect for high usage applications, whether it is for domestic, commercial or industrial. They have the power to run continuously while being able to maintain a good airflow.

Display:  List Grid

  • Capacity: 1070 m3/hr (297.22 l/s)
    Hole (Cutout) Size: 262mm Round
    Face Size: 320mm Square
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    Available in White ONLY

    The OV1 range is ideal for high usage domestic or commercial applications. The fans are available in two sizes. They have sealed, ball bearing motors which are rated as “continuous” running. They can be speed controlled and connected to short lengths of duct. If you wish to speed control the fan you will need to purchase the additional controller (listed below), which will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $309.00 $255.00
  • Capacity: 1700 m3/hr (472.22 l/s)
    Hole (Cutout) Size: 312mm Round
    Face Size: 430mm Square
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    Available in White ONLY

    The OV1 range is ideal for high usage domestic or commercial applications. The fans are available in two sizes. They have sealed, ball bearing motors which are rated as “continuous” running. They can be speed controlled and connected to short lengths of duct. If you wish to speed control the fan you will need to purchase the additional controller (listed below), which will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $369.00 $330.00
  • Capacity: 3015 m3/hr (837.5 l/s)
    Hole (Cutout) Size: 359mm Round
    Face Size:450mm Square
    Ductable: No
    View full technical specs further down the page


    The Vortice A-E range of commercial plate axial fans are suitable for applications such as warehouses, factories gyms etc. The fans are suitable for continuous operation and are IP54 rated. Read more about the fan below.

    $449.00
  • Capacity: 764 m3/hr (212 l/s)
    Hole (Cutout) Size: 264mm Round
    Face Size: 320mm Square
    Ductable: No
    View full technical specs further down the page


    The Vortice A-E range of commercial plate axial fans are suitable for applications such as warehouses, factories gyms etc. The fans are suitable for continuous operation and are IP54 rated. Read more about the fan below.

    $389.00
  • Capacity: 1563 m3/hr (434 l/s)
    Hole (Cutout) Size: 316mm Round
    Face Size: 380mm Square
    Ductable: No
    View full technical specs further down the page


    The Vortice A-E range of commercial plate axial fans are suitable for applications such as warehouses, factories gyms etc. The fans are suitable for continuous operation and are IP54 rated. Read more about the fan below.

    $409.00
  • Capacity: 2700 m3/hr (750 l/s)
    Hole (Cutout) Size: 325mm Round
    Face Size: 395mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $570.00
  • Capacity: 2052 m3/hr (570 l/s)
    Hole (Cutout) Size: 375mm Round
    Face Size: 460mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $730.00
  • Capacity: 2700 m3/hr (750 l/s)
    Hole (Cutout) Size: 375mm Round
    Face Size: 460mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $655.00
  • Capacity: 1260 m3/hr (350 l/s)
    Hole (Cutout) Size: 325mm Round
    Face Size: 395mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $545.00
  • Capacity: 1872 m3/hr (520 l/s)
    Hole (Cutout) Size: 325mm Round
    Face Size: 395mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $485.00
  • Capacity: 1044 m3/hr (290 l/s)
    Hole (Cutout) Size: 264mm Round
    Face Size: 320mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $455.00
  • Capacity: 792 m3/hr (220 l/s)
    Hole (Cutout) Size: 214mm Round
    Face Size: 280mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $425.00
  • Capacity: 1656 m3/hr (460 l/s)
    Hole (Cutout) Size: 264mm Round
    Face Size: 320mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $485.00
  • Capacity: 504 m3/hr (140 l/s)
    Hole (Cutout) Size: 214mm Round
    Face Size: 280mm Round
    Ductable: Yes (Very short direct lengths ONLY)
    View full technical specs further down the page


    The Fantech RP Series suitable for wall or ceiling mounting, is a high quality, cost effective fan suitable for a broad range of commercial and industrial applications.

     

    Fantech RP fans have a galvanised steel fan impeller and ring. The fan impeller is black in colour, while other components have an Oyster Grey powder-coated finish. Wiring access is from the rear of the fan. Click on the 'dimensions and performance' tab below to view technical information pertaining to this model.

    Note: the particular wiring and capacitor configuration does not allow for installation of a lead and plug. This fan will need to be hardwired by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $439.00
  • Capacity: 2280 m3/hr (633.33 l/s)
    Hole (Cutout) Size: 408mm Square (Wooden frame for the fan needs to be fabricated)
    Face Size: 453mm Square
    Ductable: No
    View full technical specs further down the page


    This fan is an industrial grade wall mounted exhaust fan with self closing louvers which prevent reverse airflow. The fan is suitable for industrial, commercial or domestic application. The Industrial wall mounted exhaust fan can be used to extract heat, air or dust or to ventilate a space such as a factory or garage. The fan is designed to extract large volumes of air (the fan has a huge capacity of 2280 m3/hr) at a relatively low noise.

     

    The fan is easy to install, it comes with a 240v motor ready to be hardwired.


    $349.00
  • Capacity: 1080 m3/hr (300 l/s)
    Hole (Cutout) Size: 344mm Square (Wooden frame for the fan needs to be fabricated)
    Face Size: 376mm Square
    Ductable: No
    View full technical specs further down the page


    This fan is an industrial grade wall mounted exhaust fan with self closing louvers which prevent reverse airflow. The fan is suitable for industrial, commercial or domestic application. The Industrial wall mounted exhaust fan can be used to extract heat, air or dust or to ventilate a space such as a factory or garage. The fan is designed to extract large volumes of air (the fan has a huge capacity of 1080 m3/hr) at a relatively low noise.

     

    The fan is easy to install, it comes with a 240v motor ready to be hardwired.


    $269.00
  • Capacity: 840 m3/hr (233.33 l/s)
    Hole (Cutout) Size: 280mm Square (Wooden frame for the fan needs to be fabricated)
    Face Size: 318mm Square
    Ductable: No
    View full technical specs further down the page


    This fan is an industrial grade wall mounted exhaust fan with self closing louvers which prevent reverse airflow. The fan is suitable for industrial, commercial or domestic application. The Industrial wall mounted exhaust fan can be used to extract heat, air or dust or to ventilate a space such as a factory or garage. The fan is designed to extract large volumes of air (the fan has a huge capacity of 840 m3/hr) at a relatively low noise.

    The fan is easy to install, it comes with a 240v motor ready to be hardwired.


    $229.00
  • Capacity: 780 m3/hr (216.66 l/s)
    Hole (Cutout) Size: 242mm Square (Wooden frame for the fan needs to be fabricated)
    Face Size: 294mm Square
    Ductable: No
    View full technical specs further down the page


    This fan is an industrial grade wall mounted exhaust fan with self closing louvers which prevent reverse airflow. The fan is suitable for industrial, commercial or domestic application. The Industrial wall mounted exhaust fan can be used to extract heat, air or dust or to ventilate a space such as a factory or garage. The fan is designed to extract large volumes of air (the fan has a huge capacity of 780 m3/hr) at a relatively low noise.

    The fan is easy to install, it comes with a 240v motor ready to be hardwired.


    $199.00
  • Capacity: 666 m3/hr (185 l/s)
    Hole (Cutout) Size: 325mm Round
    Face Size:360mm Round
    Ductable: No (Unit will simply blow into the roofspace)
    View full technical specs further down the page


    The Lenco ceiling mounted exhaust fan is a 300mm all metal long life ceiling fan. The fan is heat resistant making it an ideal choice for near stoves. The large capacity makes the fan well suited for large applications.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $375.00
  • Capacity: 454 m3/hr (126.11 l/s)
    Hole (Cutout) Size: 270mm Round
    Face Size:320mm Round
    Ductable: No (Unit will simply blow into the roofspace)
    View full technical specs further down the page


    The Lenco ceiling mounted exhaust fan is a 250mm all metal long life ceiling fan. The fan is heat resistant making it an ideal choice for near stoves. The large capacity makes the fan well suited for large applications.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $289.00
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)