Inline Exhaust Fans

in line exhaust fans

Choosing An Inline Exhaust Fan

Are you looking for an Inline Fan kit? Click here for our pre-packaged inline fan kits which include internal, external vent, ducting and inline fan. There are three types of Inline exhaust fans; Axial, Mixed Flow and Centrifugal:

Axial
Mixed Flow
Centrifugal

Axial Inline exhaust fans have a single propeller and are good at moving larger amounts of air at low pressure, that is with a minimum of restrictions to air flow, like short lengths of duct, few bends, no branches, etc. Please refer to the volume to pressure curves of each fan for more detailed technical information. View Axial inline fans here

Mixed Flow Inline exhaust fans are a mixture between the Axial and Centrifugal models. They have good airflow and good pressure characteristics, can be used for longer runs of duct, bends, branches, etc. They show centrifugal fan characteristics from a size of 150mm upwards and axial fan characteristics for sizes smaller than 150 mm. Please refer to the volume to pressure curves of each fan for more detailed technical information. View Mixed Flow inline fans here

Centrifugal Inline exhaust fans move good volumes of air against high pressure. This means they can be used for longer runs of duct, branches, bends, etc. Please refer to the volume to pressure curves of each fan for more detailed technical information. View Centrifugal inline fans here.

Showing 1–24 of 59 results

  • spec sheetCapacity: 135 m3/hr (37.5 l/s)
    Motor Type: Axial
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $59.00 $45.00
  • spec sheetCapacity: 135 m3/hr (37.5 l/s)
    Motor Type: Axial
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $79.00 $60.00
  • spec sheetCapacity: 243 m3/hr (67.5 l/s)
    Motor Type: Axial
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $65.00 $59.00
  • spec sheetCapacity: 243 m3/hr (67.5 l/s)
    Motor Type: Axial
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $80.00 $74.00
  • spec sheetCapacity: 358 m3/hr (99.44 l/s)
    Motor Type: Axial
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $79.00
  • spec sheetCapacity: 358 m3/hr (99.44 l/s)
    Motor Type: Axial
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications. It is an axial flow design which provides good air volume at low pressures. It is typically used with short lengths of duct and to service single rooms.

     

    Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $94.00

  • Capacity: 335 m3/hr (93 l/s)
    Motor Type: Axial
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Quietline is a high quality axial inline fan which can be used for supply or extraction in domestic situations. The fan is equipped with a high quality single phase motor which has inbuilt anti vibration rubber connectors, resulting in a fan which operates quietly. The fan uses a mere 22w and comes with a mounting bracket as pictured.

     

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $109.00

  • Capacity: 335 m3/hr (93 l/s)
    Motor Type: Axial
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Quietline is a high quality axial inline fan which can be used for supply or extraction in domestic situations. The fan is equipped with a high quality single phase motor which has inbuilt anti vibration rubber connectors, resulting in a fan which operates quietly. The fan uses a mere 22w and comes with a mounting bracket as pictured. This fan comes with a lead and plug attached, meaning it will simply plug into a powerpoint.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $124.00
  • spec sheetHigh Speed Capacity: 187 m3/hr (51.94 l/s)
    Low Speed Capacity: 145 m3/hr (40.27 l/s)
    Motor Type: Mixflow
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications.

    The TT Mixed Flow in line exhaust fan (100mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 145m3/hr, the higher setting has an output capacity of 187m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the 'flex and plug' accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for 'change of mind' reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $160.00 $95.00
  • spec sheetHigh Speed Capacity: 187 m3/hr (51.94 l/s)
    Low Speed Capacity: 145 m3/hr (40.27 l/s)
    Motor Type: Mixflow
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications.

    The TT Mixed Flow in line exhaust fan (100mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 145m3/hr, the higher setting has an output capacity of 187m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length. The fan is wired to the highest speed setting, it can be wired to the low setting on request.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $175.00 $110.00
  • spec sheetHigh Speed Capacity: 280 m3/hr (77.77 l/s)
    Low Speed Capacity: 200 m3/hr (55.55 l/s)
    Motor Type: Mixflow
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (125mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 200m3/hr, the higher setting has an output capacity of 280m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the 'flex and plug' accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for 'change of mind' reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $115.00
  • spec sheetHigh Speed Capacity: 280 m3/hr (77.77 l/s)
    Low Speed Capacity: 200 m3/hr (55.55 l/s)
    Motor Type: Mixflow
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (125mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 200m3/hr, the higher setting has an output capacity of 280m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $205.00 $130.00
  • spec sheetHigh Speed Capacity: 520 m3/hr (144.44 l/s)
    Low Speed Capacity: 405 m3/hr (112.5 l/s)
    Motor Type: Mixflow
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (150mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 405m3/hr, the higher setting has an output capacity of 520m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the ‘flex and plug’ accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $230.00 $140.00
  • spec sheetHigh Speed Capacity: 520 m3/hr (144.44 l/s)
    Low Speed Capacity: 405 m3/hr (112.5 l/s)
    Motor Type: Mixflow
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (150mm) has two speeds (with this model you can select speeds via the switch on the side of the motor). The lower setting has an output capacity of 405m3/hr, the higher setting has an output capacity of 520m3/hr. If the fan is set on the lower setting, the fan is much quieter. This model may be preferable if you wish to have the functionality of switching between speeds without the need on an installing electrician.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $280.00 $155.00
  • spec sheetHigh Speed Capacity: 555 m3/hr (154.16 l/s)
    Low Speed Capacity: 405 m3/hr (112.5 l/s)
    Motor Type: Silent Mixflow
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    Looking for a top of the range inline fan – look no further!

     

    The TT Silent Inline fan is a innovative new product designed specifically to operate quietly. With a built in 50mm layer of mineral wool sound insulation this product ensures quiet operation without compromising on performance. The fan has a capacity of 555m3/hr on the highest speed and a dBA rating of only 33. Most fans on the market with a comparable capacity will be around the 50dBA mark! The fan is a great choice for the noise conscious. Click on the dimensions and performance tab below to view overall dimensions and a cross section of the product.

     

    This product will need to be hardwired by an electrician – if you wish to plug the fan into a standard powerpoint you can add the 'flex and plug accessory' to your order below. Please note we are unable to accept returns for change of mind reasons once a plug has been installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $349.00
  • spec sheetHigh Speed Capacity: 555 m3/hr (154.16 l/s)
    Low Speed Capacity: 405 m3/hr (112.5 l/s)
    Motor Type: Silent Mixflow
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    Looking for a top of the range inline fan – look no further!

     

    The TT Silent Inline fan is a innovative new product designed specifically to operate quietly. With a built in 50mm layer of mineral wool sound insulation this product ensures quiet operation without compromising on performance. The fan has a capacity of 555m3/hr on the highest speed and a dBA rating of only 33. Most fans on the market with a comparable capacity will be around the 50dBA mark! The fan is a great choice for the noise conscious. Click on the dimensions and performance tab below to view overall dimensions and a cross section of the product.

     

    Please note: This fan comes with a lead and plug installed – meaning it will simply plug into a standard powerpoint. Please also be aware we are unable to accept returns for change of mind reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $364.00
  • spec sheetHigh Speed Capacity: 1040 m3/hr (288.88 l/s)
    Low Speed Capacity: 830 m3/hr (230.5 l/s)
    Motor Type: Mixflow
    Ductable: Yes (200mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (200mm) has two speeds which can be selected via the switch on the side of the motor. The lower setting has an output capacity of 830m3/hr, the higher setting has an output capacity of 1040m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $285.00 $195.00
  • spec sheetHigh Speed Capacity: 1020 m3/hr (283.33 l/s)
    Low Speed Capacity: 810 m3/hr (225 l/s)
    Motor Type: Silent Mixflow
    Ductable: Yes (200mm duct diameter)
    View full technical specs further down the page


    Looking for a top of the range inline fan – look no further!

     

    The TT Silent Inline fan is a innovative new product designed specifically to operate quietly. With a built in 50mm layer of mineral wool sound insulation this product ensures quiet operation without compromising on performance. The fan has a capacity of 1020m3/hr on the highest speed and a dBA rating of only 36. Most fans on the market with a comparable capacity will be around the 55-60dBA mark! The fan is a great choice for the noise conscious. Click on the dimensions and performance tab below to view overall dimensions and a cross section of the product.

     

    This product will need to be hardwired by an electrician – if you wish to plug the fan into a standard powerpoint you can add the 'flex and plug accessory' to your order below. Please note we are unable to accept returns for change of mind reasons once a plug has been installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $415.00
  • spec sheetHigh Speed Capacity: 1020 m3/hr (283.33 l/s)
    Low Speed Capacity: 810 m3/hr (225 l/s)
    Motor Type: Silent Mixflow
    Ductable: Yes (200mm duct diameter)
    View full technical specs further down the page


    Looking for a top of the range inline fan – look no further!

     

    The TT Silent Inline fan is a innovative new product designed specifically to operate quietly. With a built in 50mm layer of mineral wool sound insulation this product ensures quiet operation without compromising on performance. The fan has a capacity of 1020m3/hr on the highest speed and a dBA rating of only 36. Most fans on the market with a comparable capacity will be around the 55-60dBA mark! The fan is a great choice for the noise conscious. Click on the dimensions and performance tab below to view overall dimensions and a cross section of the product.

     

    Please note: This fan comes with a lead and plug installed – meaning it will simply plug into a standard powerpoint. Please also be aware we are unable to accept returns for change of mind reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $430.00
  • spec sheetHigh Speed Capacity: 1400 m3/hr (388.88 l/s)
    Low Speed Capacity: 1110 m3/hr (308.33 l/s)
    Motor Type: Mixflow
    Ductable: Yes (250mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (250mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 1110m3/hr, the higher setting has an output capacity of 1400m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the 'flex and plug' accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for 'change of mind' reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $360.00 $299.00
  • spec sheetHigh Speed Capacity: 1400 m3/hr (388.88 l/s)
    Low Speed Capacity: 1110 m3/hr (308.33 l/s)
    Motor Type: Mixflow
    Ductable: Yes (250mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (250mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 1110m3/hr, the higher setting has an output capacity of 1400m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $375.00 $314.00
  • spec sheetHigh Speed Capacity: 2050 m3/hr (569.44 l/s)
    Low Speed Capacity: 1570 m3/hr (436.11 l/s)
    Motor Type: Mixflow
    Ductable: Yes (315mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (315mm) has two speeds (available by connecting to the relevant winding). The high setting has an output capacity of 2050m3/hr, the lower setting has an output capacity of 1570m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the 'flex and plug' accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for 'change of mind' reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $445.00 $349.00
  • spec sheetHigh Speed Capacity: 2050 m3/hr (569.44 l/s)
    Low Speed Capacity: 1570 m3/hr (436.11 l/s)
    Motor Type: Mixflow
    Ductable: Yes (315mm duct diameter)
    View full technical specs further down the page


    The TT Mixed Flow in line exhaust fan (315mm) has two speeds (available by connecting to the relevant winding). The high setting has an output capacity of 2050m3/hr, the lower setting has an output capacity of 1570m3/hr. If the fan is set on the lower setting, the fan is much quieter.

    This model has a long life, continuous rated motor.

    Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $460.00 $364.00

  • Capacity: 255 m3/hr (70.8 l/s)
    Motor Type: Mixflow
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    Model: VORTICE LINEO 100 V0

    The Vortice Lineo is a high quality mixflow inlnie fan with enclosed impellers made from self extinguishing VO mineral charged polypropoline. The ball bearing motor means the fan has a long life and is suitable for continuous running.

    Capacity: 255m3/hr

    Please Note: If you wish to simply plug the fan into a standard powerpoint you can add the 'flex and plug' accessory to your order which is listed below. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for 'change of mind' reasons if a plug is installed.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $279.00
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)