|Recommended Room Size (Based on Achieving 15 air changes per hour)|
This fan comes with a lead and plug for connection to a power socket
|Motor Power (Wattage)|
|Max Temperature of Transferred Air|
Fanco – The manufacturer offers a 2 year replacement warranty (conditions apply)
All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible
|Room Size Recommendation Disclaimer|
As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice.
|Lead & Plug Customisation Disclaimer|
Please be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.
TT Mixflow In Line Fan 100mm w/ Lead & Plug
IN STOCK – Typically dispatches in 1-2 business days
A quality in line fan that is normally ducted and may be used for exhaust, air transfer and other applications.
The TT Mixed Flow in line exhaust fan (100mm) has two speeds (available by connecting to the relevant winding). The lower setting has an output capacity of 145m3/hr, the higher setting has an output capacity of 187m3/hr. If the fan is set on the lower setting, the fan is much quieter.
This model has a long life, continuous rated motor.
Please Note: This fan comes with a 'flex and plug' so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length. The fan is wired to the highest speed setting, it can be wired to the low setting on request.
Compatible Speed Controller
Once installed (electrician required) this positional switch will allow you to switch between the low and high speed.