Wall Exhaust Fans


wall exhaust fans


quiet wall mounted exhaust fan sale


Wall Fan – How To Choose A Wall Exhaust Fan

Wall fans are popular for all domestic applications (bathroom, kitchens, laundry areas), particularly where ceiling/roof space is limited. The wall fan motor is either positioned inside the room, or on the outside wall (both are typically ducted), providing both a suitable exhaust capacity with an aesthetically pleasing appearance. There are a few factors to keep in mind when choosing a wall exhaust fan:

  • Calculating the area of the room you wish to install the wall fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower). This will give you the approximate capacity (or airflow) required to ventilate the room.
  • If it is replacing an existing wall fan, what hole cut-out size does it need to fit?

Browse our large range of wall exhaust fans below or use the intuitive ‘Narrow Your Search’ function on the left hand side:

Display:  List Grid

Showing 1–24 of 90 results

  • spec sheet
    Capacity: 750 m3/hr (208 l/s)
    Hole (Cutout) Size: 175mm
    Face Size: 430 x 360mm
    Motor Type: Centrifugal
    Ductable: Yes
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller. This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required. View more technical information below or click on the red pdf button to download a detailed spec sheet.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $439.00
  • Capacity: 185 m3/hr (51.38 l/s)
    Wall Hole (Cutout) Size: 130mm Round
    Window Hole (Cutout) Size: 150mm – 160mm Round
    Face Size: 186mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    A capable exhaust fan with a simple design and can be mounted on a window or a thin panel wall. It is available in two sizes. The Valerie Window fan needs to be hardwired by an electrician unless a lead and plug is installed. This fan comes with electric shutters which close the inside cover when the fan is not in operation.

     

    If you intend to use this fan as a wall mounted fan the easiest thing to do is to discard the provided rear and replace this with a more suitable external vent.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    $225.00 $129.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Wall Hole (Cutout) Size: 155mm Round
    Window Hole (Cutout) Size: 175mm – 194mm Round
    Face Size: 210mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    A capable exhaust fan with a simple design and can be mounted on a window or a thin panel wall. It is available in two sizes. The Valerie Window fan needs to be hardwired by an electrician unless a lead and plug is installed. This fan comes with electric shutters which close the inside cover when the fan is not in operation.

     

    If you intend to use this fan as a wall mounted fan the easiest thing to do is to discard the provided rear and replace this with a more suitable external vent.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    $229.00 $149.00
  • Capacity: 210 m3/hr (58.33 l/s)
    Hole (Cutout) Size: 183mm – 188mm Round
    Face Size: 214mm Round
    Ductable: No
    View full technical specs further down the page


    This HCM Exhaust fan is suitable for applications ranging from domestic kitchens, bathrooms, commercial offices and all types of small or confined areas. All HCM Exhaust Fans are of compact low profile design and have weather and impact resistant plastic housings with integral air operated shutters. Impellers are sickle shaped for high performance. Motors are shaded-pole induction motor with sleeve bearings.

     

    Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube. These products are listed below as accessories:


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    $210.00
  • Capacity: 380 m3/hr (105.55 l/s)
    Hole (Cutout) Size: 220mm – 225mm Round
    Face Size: 255mm Round
    Ductable: No
    View full technical specs further down the page


    This HCM Exhaust fan is suitable for applications ranging from domestic kitchens, bathrooms, commercial offices and all types of small or confined areas. All HCM Exhaust Fans are of compact low profile design and have weather and impact resistant plastic housings with integral air operated shutters. Impellers are sickle shaped for high performance. Motors are shaded-pole induction motor with sleeve bearings.

     

    Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube. These products are listed below as accessories:


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $230.00
  • Capacity: 630 m3/hr (175 l/s)
    Hole (Cutout) Size: 262mm – 267mm Round
    Face Size: 298mm Round
    Ductable: No
    View full technical specs further down the page


    This HCM Exhaust fan is suitable for applications ranging from domestic kitchens, bathrooms, commercial offices and all types of small or confined areas. All HCM Exhaust Fans are of compact low profile design and have weather and impact resistant plastic housings with integral air operated shutters. Impellers are sickle shaped for high performance. Motors are shaded-pole induction motor with sleeve bearings.

     

    Please Note – If you require this HCM Exhaust fan for wall installation for a wall thicker than 25mm you will need to purchase a set of wall rods and a wall tube. These products are listed below as accessories:


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including run on timers.
    $259.00
  • Exhaust Capacity: 480 m3/hr (133.33 l/s)
    Hole (Cutout) Size: 257mm – 262mm Round
    Face Size: 294mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. This model comes with a pull cord, which means the unit is switched on/off by pulling the cord down. The fan is a low noise, high quality product.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $389.00
  • Exhaust Capacity: 235 m3/hr (65.27 l/s)
    Hole (Cutout) Size: 185mm – 190mm Round
    Face Size: 215mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. This model comes with a pull cord, which means the unit is switched on/off by pulling the cord down. The fan is a low noise, high quality product.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $219.00
  • Exhaust Capacity: 1050 m3/hr (291.66 l/s)
    Supply Capacity: 700 m3/hr (194.4 l/s)
    Hole (Cutout) Size: 324mm – 329mm Round
    Face Size: 390mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts, the shutters are positioned behind the front grille automatically open and close slowly when the unit is operated. This model can also be wired to operate in reverse if required, meaning it can either be configured to supply or exhaust, depending on your requirements.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $695.00
  • Exhaust Capacity: 480 m3/hr (133.33 l/s)
    Supply Capacity: 310 m3/hr (86.11 l/s)
    Hole (Cutout) Size: 257mm – 262mm Round
    Face Size: 294mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts, the shutters are positioned behind the front grille automatically open and close slowly when the unit is operated. This model can also be wired to operate in reverse if required, meaning it can either be configured to supply or exhaust, depending on your requirements.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $495.00
  • Exhaust Capacity: 235 m3/hr (65.27 l/s)
    Supply Capacity: 150 m3/hr (41.66 l/s)
    Hole (Cutout) Size: 185mm – 190mm Round
    Face Size: 215mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts, the shutters are positioned behind the front grille automatically open and close slowly when the unit is operated. This model can also be wired to operate in reverse if required, meaning it can either be configured to supply or exhaust, depending on your requirements.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $225.00
  • Capacity: 1400 m3/hr (388.88 l/s)
    Hole (Cutout) Size: 324mm – 329mm Round
    Face Size: 364mm Square
    Ductable: No
    View full technical specs further down the page


    The VITRO fan is designed for wall, window, double glazed and double window installations in domestic and commercial environments. Primary function to exhaust air directly to the outside. This model can be wired to operate in reverse if required.

    IMPORTANT NOTICE: If you wish to run this unit as a supply fan you will need to purchase the optional controller, which is listed below as an accessory. The unit cannot be configured to supply without this component.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $489.00
  • Capacity: 700 m3/hr (194.44 l/s)
    Hole (Cutout) Size: 254mm – 258mm Round
    Face Size: 287mm Square
    Ductable: No
    View full technical specs further down the page


    The VITRO fan is designed for wall, window, double glazed and double window installations in domestic and commercial environments. Primary function to exhaust air directly to the outside. This model can be wired to operate in reverse if required.

    IMPORTANT NOTICE: If you wish to run this unit as a supply fan you will need to purchase the optional controller, which is listed below as an accessory. The unit cannot be configured to supply without this component.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $335.00
  • spec sheet
    Capacity: 380 m3/hr (106 l/s)
    Hole (Cutout) Size: 150mm round
    Face Size: 345 x 262mm
    Motor Type: Centrifugal
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller.
    This Vortice External Wall Mounted Centrifugal Fan is ideal for kitchens, bathrooms, storage areas, cellars, bars, fitness centres, workplaces and shops. It is a solution suitable for those spaces where more than one room requires centralised extraction. This fan has a two speed option, has steel housing and utilises long-life polyester paint. In order to stop air returning the room there is also an automatic close function.
    View more technical information below or click on the red pdf button to download a detailed spec sheet.

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $399.00
  • spec sheet
    Capacity: 785 m3/hr (218 l/s)
    Motor Type: Centrifugal
    Hole Size: 205mm
    Ductable: Yes (200mm duct diameter)
    View full technical specs further down the page


    The Vortice CA is a high quality centrifugal wall fan designed for external wall mounting. The fan has a high quality AC motor with inbuilt thermal overload cutout and shaft turning in ball bearings, coupled to backward curved impeller. View more technical information below or click on the red pdf button to download a detailed spec sheet.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $449.00
  • spec sheetCapacity: 710 m3/hr (197.22 l/s)
    Motor Type: Centrifugal
    Hole Size: 205mm round
    Ductable: Yes (200mm duct diameter)
    View full technical specs further down the page


    The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $335.00 $295.00
  • spec sheetCapacity: 390 m3/hr (108.33 l/s)
    Motor Type: Centrifugal
    Hole Size: 130m round
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $275.00 $240.00
  • Capacity: 700 m3/hr (194.44 l/s)
    Hole (Cutout) Size: 254mm – 258mm Round
    Face Size: 287mm Square
    Ductable: No
    View full technical specs further down the page


    The VITRO fan is designed for wall, window, double glazed and double window installations in domestic and commercial environments. Primary function to exhaust air directly to the outside. This fan also comes with a pull cord hanging from the motor which allows for easy on/off operation.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $325.00 $315.00
  • spec sheetCapacity: 600 m3/hr (166.66 l/s)
    Motor Type: Centrifugal
    Hole Size: 155mm round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.

     

    This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $319.00 $285.00
  • Capacity: 380 m3/hr (105.55 l/s)
    Hole (Cutout) Size: 185mm – 190mm Round
    Face Size: 215mm Square
    Ductable: No
    View full technical specs further down the page


    The Vario is an axial exhaust fan suitable for window or wall installation. It has electric shutters on the inside to prevent back drafts. With this long life model with ball bearings, you can expect a high performance.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories.
    $265.00 $225.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $224.00 $164.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $214.00 $164.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $129.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $179.00 $109.00
Save & Share Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save & Share Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)