Manufacturer | Fanco |
---|---|
Model Number | TT 150 |
Material | Plastic |
Capacity (m3/hr) | 520 m3/hr |
Capacity (L/S) | 144.4 L/S |
Motor Type | Mixflow |
Recommended Room Size (Based on Achieving 15 air changes per hour) | 34.6 m3 |
Noise Level | 44 dB(A) |
IP Rating | IPX4 |
Voltage | 230 |
Installation | This fan comes with a lead and plug for connection to a power socket, To use this product in conjunction with hardwired accessories, an electrician will be required |
Duct Size | 150mm |
Motor RPM | 2460 |
Max Temperature of Transferred Air | 60 °C |
Warranty | Fanco – The manufacturer offers a 2 year replacement warranty (conditions apply) |
Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Lead & Plug Customisation Disclaimer | Please be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length. |
TT Mixflow In Line Fan 150mm with Inbuilt Speed Switch & Plug
IN STOCK – Typically dispatches in 1-2 business days
$280.00 $159.00
High Speed Capacity: 520 m3/hr (144.44 l/s)
Low Speed Capacity: 405 m3/hr (112.5 l/s)
Motor Type: Mixflow
Ductable: Yes (150mm duct diameter)
View full technical specs further down the page
The TT Mixed Flow in line exhaust fan (150mm) has two speeds (with this model you can select speeds via the switch on the side of the motor). The lower setting has an output capacity of 405m3/hr, the higher setting has an output capacity of 520m3/hr. If the fan is set on the lower setting, the fan is much quieter. This model may be preferable if you wish to have the functionality of switching between speeds without the need on an installing electrician.
This model has a long life, continuous rated motor.
Please Note: This fan comes with a ‘flex and plug’ so the fan can simply be plugged into a standard powerpoint. A member of our technical team will install this to the fan. Please also be aware that we are unable to accept returns for ‘change of mind’ reasons if a plug is installed. The flex is 1m in length.
Compatible Speed Controller
Once installed (electrician required) this positional switch will allow you to switch between the low and high speed.
John Mann (verified owner) –
I have not installed it yet but it looks ok
Darrel Young (verified owner) –
The fan works very well in the En-suite ceiling, easy to install especially the way the fan can be split and rotated on its base bracket.
Johannes Hartzenberg –
Works very well and is an efficient hot air extractor for us.
Ken Winn (verified owner) –
Filip Gorski (verified owner) –
Daniel Revie (verified owner) –
Jeremy Hicks (verified owner) –
Tony (verified owner) –
Great service, good quality products and arrived within a few days of my on line order.
Bruce (verified owner) –
Works well so far, but only just installed
Richard (verified owner) –
Jodie –
Great no problems at all works very well.
Sam –
Neil –
This is a great fan very quiet
Chris –
Website had sufficient information on what to order. Order and delivery was fast and efficient, I changed the ducting on the standard kit to the R1.5 without any issue. Installation was straight forward. Customer service rep was able to help with all requests.
Stephen –
Awesome performance and easy to install by my electrician. Needed this to ventilate steamy bathroom. Plus you can choose between 2 speeds.
Fouad –
Great inline fan I used it for a laundry
Paul –