Other

Display:  List Grid

Showing 1–24 of 35 results

  • This is an electronic type speed-controller which provides infinite variation of fan speed from 100% down to approximately 30% of full speed.
    When used to control a number of identical fans the sum of the full load amps of all the connected fans must not exceed 85% of the maximum rating of the controller (which is 2.0).
    Dimensions: 70W × 114H × 36D

    $95.00
  • Dimensions 110 x 80 x 42 (mm)

    The R10 Speed Controller is a variable speed switch specifically designed to be used with selected Expella fans. It’s design features a cover, removable terminals for easy connection and an external trimmer for adjusting the fans minimum operational speed.

    Features

    • Preset holes for surface and recessed cable entry
    • Single-phase 230V – 50Hz
    • Max. Load 1A
    • IP42 Protected

    $99.00
  • Add this product to your shopping cart if you wish for us to install a flex and plug to your fan. The cord on this plug in 30cm in length. This is for use with the Commercial wall fans ONLY.

    Please Note: We are unable to accept returned fans that have a flex and plug installed.

     

    Note: This lead and plug option can only be used in conjunction with specific fans – Please refer to compatible accessories below product listings.

    $15.00
  • Dimensions: 120 x 120 x 43mm

    A non-reversible variable electronic speed controller. Maximum load 450w.
    220 – 240v 50Hz.

    $139.00
  • Ceiling kit made of soft rubber to prevent water infiltration and to maintain IPX4 protection on all surfaces.

    $29.00
  • Ceiling kit made of soft rubber to prevent water infiltration and to maintain IPX4 protection on all surfaces.

    $25.00
  • Ceiling kit made of soft rubber to prevent water infiltration and to maintain IPX4 protection on all surfaces.

    $20.00
  • This Roof Cowl Kit is designed for metal roof installations. It comes complete with a cowl, a 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. This model is a 100mm size.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, and also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    4.50 out of 5
    $95.00
  • This Roof Cowl Kit is designed for metal roof installations. It comes complete with a cowl, a 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. This model is a 125mm size.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, and also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    5.00 out of 5
    $99.00
  • This Roof Cowl Kit is designed for metal roof installations. It comes complete with a cowl, a 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. This model is a 150mm size.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, and also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    4.80 out of 5
    $105.00
  • This Roof Cowl Kit is designed for metal roof installations. It comes complete with a cowl, a 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties. This model is a 200mm size.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, and also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    4.75 out of 5
    $145.00
  • This Roof Cowl Kit is designed for metal roof installations. It comes complete with a cowl, thru roof mounting tube and metal roof flashing.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, and also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls.

    $349.00
  • This Roof Cowl Kit is designed for tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    $135.00
  • This Roof Cowl Kit is designed for tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    $145.00
  • This Roof Cowl Kit is designed for tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    5.00 out of 5
    $155.00
  • This Roof Cowl Kit is designed for tile roof installations. The kits come complete with a cowl, 60cm long flue (30 gauge galvanised steel), suitable roof flashing and mounting ties.
     
    About the Cowl:
    The unique design of these cowls provides efficient air exhaust expulsion, It also offers superior protection from rain, back drafts and rodents – unlike regular open type roof cowls. The mushroom cowl is aluminium. Note the colour differs from the image shown, most items are silver.
     
    The cowl slips over the roof pipe to prevent rain water running down the inside of the pipe.
     
    Click on the PDF button to the right to download instructional information regarding installation.

    $185.00
  • These rods are specific to the Vario exhaust fan – they allow the wall fan to be installed in a wall cavity with a bit more width.

    If the wall cavity you are installing in is under 38mm then you will be fine with just the fan. If your wall cavity is between 38mm – 380mm then these rods will be helpful for your installation. If its over 380mm then you will need to find an alternative fan.

    $75.00
  • 3 steps reversible speed controller for use with the Vitro range of exhaust fans (fitted with transformer).
    • ON/OFF switch
    • IP42 protection
    • Max. load: 100 W (0,5 A)
    • Supply voltage: 230V-50/60 Hz
    • Sizes: 118 x 118 x 58 mm
    • Weight: 0,7 kg

    Installation would need to be carried out by a qualified electrician.

    $89.00
  • The wall mounted Humidity Sensor automatically activates the exhaust fan when humidity levels reach a pre- determined level, reducing moisture in the home and helping to prevent condensation and mould.

    $119.00
  • The Deflecto Lint Trap Kit is for indoor dryer venting. It involves quick and easy installation fitting all clothes dryers however cannot be used with gas clothes dryers. Included in the kit is the lint trap, Supurr-Flex Metallic Duct and 2 Clamps. This particular venting kit is for indoor use only.



    Performance Notes:

    • Melting Point: 325°F+ for container.
    • Operating Temperature: 265°F for duct.
    • May require open doors in small rooms for adequate heat distribution.

    Please Note: An electrician will be required to install this product
    spec sheet

    $49.00
  • The Ventair Motion Sensor and Timer operates with all new and exisiting Ventair exhaust fans. The motion sensor component uses high quality infrared technology to detect signals of someone entering an area of up to 5 meters. The run on timer will work for 1 to 20 minutes of time before switching off.

    $49.00
  • The Variable Timer runs for approximately 1-25 minutes (can be adjusted) after switching off, to clear steam and odour once you leave the room.

     

    Features:
    Input: AC230-240V ~ 50Hz
    Maximum Load: 500 Watts
    Operation Temperature: -10°C to 40°C
    Settings: Adjustable from 1 to 25 minutes
    Warranty: 12 months replacement

    Please Note: An electrician will be required to install this product

    5.00 out of 5
    $39.00
  • Mounting: The sensors are designed for indoor wall surface installation.

    This Run on Timer enables the fan operation within the set time period after pressing the knob for switching the fan OFF. After the set time from 2 to 30 minutes the fan switches automatically OFF. The run-out timer is generally applicable for the fans installed in bathrooms, WC or kitchens.

    $65.00
  • spec sheet

    The Alphalux 180 Degree Motion Sensor will allow you to have motion triggered lighting or act as a safety and security precaution.

    Time Control

    Adjustments can be made to the length of time the sensor remains on after being triggered. This can vary from a minimum of 5 seconds to a maximum of 7 minutes depending on what is preferred in a particular location. Once adjusted it will have an immediate effect. Adjustments during the ON cycle should be avoided.

    Lux Control

    This feature will help to determine at what level of background light the unit will function. For example if dial is moved to the sun position the unit will trigger under full daylight conditions and at the moon then it will only trigger in complete darkness. Therefore, if three quarters between the sun and moon then triggering will occur at dusk.
    Initial setup should be done at the time of day you require your lights to illuminate to ensure trigger accuracy to preferred light level.

    Distance Control

    This function enables control over the distance at which the unit will detect movement. Range available to user is a maximum of 10 metres and a minimum of 1 metre.

    Finding an ideal location will assist you in avoiding nuisance triggering. This includes not mounting it close to electrical devices, fluorescent fittings, remote control operated doors, reflective surfaces.
    Unit should be a minimum of 2.4 metres above monitored area for best performance and to minimise false triggering of most animals direct above their expected height.

    This product must be installed by a qualified electrician and in accordance with appropriate wiring rules and regulations.

    $59.00