The exhaust fan & ventilation experts.
BathroomEducation & Advice
Inline Fan Kits
Pre packaged, ducted kits with a powerful motor situated in the roofspace.
Fans by Type
Vents & Accessories
Inline FansKits - For General Ventilation
Pre packaged kits with everything you need to ventilate a bathroom, toilet or laundry.
Kits - For Heat Transfer
Pre packaged kits designed to transfer warm or cool air from one room to others.
Kits - For Sub Floor Ventilation
Pre packaged kits designed to provide mechanical ventilation to sub floor areas.
Heat Transfer
Subfloor
Energy SavingHeat Transfer
Heat transfer is regarded as an energy efficient process as it utilises excess heat Learn More.
Roof Ventilation
Reducing heat within your roofspace can help lower the overall temperature in the living space.
Solar Powered Products
Solar powered products that harness the power of the sun to provide mechanical ventilation.
Heat/Energy Recovery Units
Bring fresh. filtered air into your home whilst removing moiture laden air at the same time.
Cooling / Heating
$599.00 Original price was: $599.00.$499.00Current price is: $499.00.
| Extraction Rate | 550 m3/hr (152.78 l/s) |
|---|---|
| Hole (Cutout) Size | 470mm x 315mm |
| Light | 4 x 5W LED (GU10) 400 Lumen (Neutral White) |
| Heat | 1 x 1000W Heat Lamp (R7S) |
| Ductable? | Yes (150mm duct diameter) |
Eglo’s latest addition to the 3-in-1 exhaust range is the Inferno (204158). The Eglo Inferno is a quality all in one exhaust, heat and lighting model that will perfectly compliment your modern bathroom space with its low profile design and straight lines. It features a 1000W heat lamp surrounded by 4 x 5w LED (GU10) lights – with the exhaust vents situated in between the heating and LED lights. The combination of all three of these elements allows for bathrooms to be well ventilated while also being cosy warm during those winter nights. The Inferno is powered by a 55W motor which allows the fan to exhaust up to 550m3/hr, making it a strong 3 in 1 bathroom solution.
The package includes a 3 meter length of 150mm flexible ducting, external grille and wall switch.
The Inferno is IP24 rated and requires a minimum ceiling cavity depth of 235mm.
| Manufacturer | Eglo |
|---|---|
| Model Number | 204158 |
| Colour | White |
| Material | Plastic |
| Hole Size | 470mm x 315mm |
| Type of Light | LED |
| Capacity (m3/hr) | 550 m3/hr |
| Capacity (L/S) | 152.78 L/S |
| Recommended Room Size (Based on Achieving 15 air changes per hour) | 36.6 m3 |
| Motor Power (Wattage) | 55w |
| Minimum Install Depth | 206mm |
| Noise Level | TBC |
| Installation | This fan requires hardwiring by an electrician |
| Installation Location | Ceiling |
| Ductable? | Ductable |
| Duct Location | Side Ducted |
| Duct Size | 150mm |
| Warranty | Eglo – The Manufacture offers a 3 year in home warranty (conditions apply) |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Only logged in customers who have purchased this product may leave a review.
Bathroom Fans
Exhaust Fans by Type
Vents & Accessories
Inline Fans & Kits
Sub Floor Ventilation
HEAT TRANSFER
Energy Saving & Air Quality
Cooling & Heating
David –
The Eglo Exhaust Fan fits in perfectly with our new bathroom décor with its modern styling.