BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
Maxair Wall Fan 150mm w Pull Cord
$409.00
Capacity: 360 m3/hr (100 l/s)
Hole (Cutout) Size: 170mm – 210mm Round
Face Size: 245mm Square
Ductable: No
View full technical specs further down the page
The Maxair exhaust wall fan features electric shutters to prevent back drafts. This product is supplied with an external grille and duct to join. Please note that auto-shutters will take approximately 30 seconds to open and close. This model also comes with a pull cord which hangs from the bottom of the motor, allowing for convenient on/off operation.
————-
This product is currently Out of Stock with no expected arrival date. For this reason it cannot be purchased. If you would like some options for suitable alternatives please contact us
| Manufacturer | Clipsal |
|---|---|
| Model Number | MAXAIR 150 PULL CORD – 7008A |
| Colour | White |
| Material | Plastic |
| Hole Size | 170mm – 210mm |
| Wall Depth | 110mm – 310mm |
| Capacity (m3/hr) | 360 m3/hr |
| Capacity (L/S) | 100 L/S |
| Recommended Room Size (Based on Achieving 15 air changes per hour) | 24 m3 |
| Motor Power (Wattage) | 38w |
| Noise Level | 49 dB(A) |
| IP Rating | IPX4 |
| Voltage | 230 – 240 |
| Installation | This fan requires hardwiring by an electrician |
| Installation Location | Wall |
| Includes Backdraft Shutter | No |
| Ductable? | Non-Ductable |
| Warranty | The manufacturer offers a 3 year replacement warranty (conditions apply). |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Easy Fit Wall Installation
MaxAir Wall Fans are the easiest to install and are supplied with unique ductwork that will easily fit walls between 110 and 310mm. No cable ties or tape is needed, as the duct attaches easily to the fan’s unique ‘duct grippers’. Both fans are configured to allow a flex and plug to be fitted or they can be wired direct.
1 review for Maxair Wall Fan 150mm w Pull Cord
Only logged in customers who have purchased this product may leave a review.
Christopher Simkin (verified owner) –
Works well as described on the web site.