Model Number | EWVUVCN2 |
---|---|
Colour | Grey |
Material | Metal |
Hole Size | 130mm |
Capacity (m3/hr) | 390 m3/hr |
Capacity (L/S) | 108.33 L/S |
Recommended Room Size (Based on Achieving 15 air changes per hour) | 26 m3 |
Motor Power (Wattage) | 75w |
Noise Level | 54 dB(A) |
IP Rating | IPX4 |
Max Temperature of Transferred Air | 55 °C |
Voltage | 230 |
Installation | This fan requires hardwiring by an electrician |
Installation Location | External Wall |
Includes Backdraft Shutter | No |
Ductable? | Ductable |
Duct Location | Rear Ducted |
Duct Size | 125mm |
Motor RPM | 2500 |
Motor Type | Centrifugal |
Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Warranty | The manufacturer offers a 2 year replacement warranty (conditions apply). |
VCN External Centrifugal Fan 125mm
$349.00
Capacity: 390 m3/hr (108.33 l/s)
Motor Type: Centrifugal
Hole Size: 130m round
Ductable: Yes (125mm duct diameter)
View full technical specs further down the page
The VCN is designed as an exterior mounted exhaust fan. The centrifugal motor is protected within the weather proof metal body. The VCN range features IPX4 protection and operating temperature of up to 55 degrees C. It can perform well with long lengths of duct.
This external centrifugal fan can be an alternative option in the case that an inline fan cannot be installed due to lack of access, where the performance of an inline is required.
Reviews
There are no reviews yet.