BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
Vortice Lineo Quiet ES Mixflow In Line Fan 150mm
IN STOCK | Typically dispatches within 3 business days
$919.00
Capacity: 515 m3/hr (143.10 l/s)
Motor Type: EC Mixflow
Ductable: Yes (150mm duct diameter)
View full technical specs further down the page
A premium EC motor inline fan made in Italy. The Vortice Lineo QUIET ES inline fans are suitable for residential, commercial or industrial applications and are the gold standard in terms of noise (40.7 decibels) and energy efficiency. Learn more about this product below.
DISCLAIMER: This product is made to order and has an ETA of 4 to 6 weeks.
Need Accessories? – Scroll to the bottom of the page to view suitable accessories, including ducting and vents.
About the Vortice Lineo Quiet ES 150
Enclosures made of fire-resistant plastic resin, E2 class, according to ISO EN 11925-2: 2010, in areas close to motor and electrical components.
Casing integrating a sound-absorbing coating, optimised to minimise sound emissions radiated into the environment and transmitted through exhaust and supply ducts.
High-quality EC (brushless) motor, thermally protected, with a shaft mounted on ball bearing supports, coupled with a centrifugal impeller.
High water resistance: IPX5 (if installed in a duct).
Equipped with a thermal fuse overheating safety device.
Ultra energy efficient – on high speed, this fan consumes only 31 watts with an airflow rated at 515 m3/hr.
Control Options
Note – Electrician required for all 3 options:
Wire in a standard fashion to run as a single-speed fan
Set it up to be a 2-speed motor (you can specify the high and low speeds) and just wire it up to a standard position switch to go between high and low
Wire it to a potentiometer (accessory listed below) to have greater control, like a dimmer switch
| Manufacturer | Vortice |
|---|---|
| Model Number | 17172 |
| Material | Plastic |
| Motor Power (Wattage) | 31w |
| Capacity (m3/hr) | 515 m3/hr |
| Capacity (L/S) | 143.10 L/S |
| Motor Type | Mixflow |
| Recommended Room Size (Based on Achieving 15 air changes per hour) | 34 m3 |
| Noise Level | 40.7 dB(A) |
| IP Rating | IPX5 |
| Voltage | 220 – 240 |
| Installation | This fan requires hardwiring by an electrician |
| Duct Size | 150mm |
| Max Temperature of Transferred Air | 60 °C |
| Warranty | Vortice – The manufacturer offers a 2 year replacement warranty (conditions apply). |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Only logged in customers who have purchased this product may leave a review.
You may also like…
Reviews
There are no reviews yet.