-
×
275w Heat Globe for Ventair Heatforce
1 × $17.00
BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
Ventair Heatforce DC 3 in 1 Exhaust Fan with Heat and CCT LED Light – White 4 Globes
IN STOCK | Typically dispatches within 3-5 business days.
$259.00
The Ventair Heatforce DC is a versatile 3 in 1 unit, providing exhaust, instant heat through 4 globes, and LED lighting. The exhaust fan offers three modes, selectable via a switch on the motor: standard mode, 24-hour operation, or a 10-minute run-on timer. In 24-hour mode, the unit consumes only 2.5 watts, ensuring continuous ventilation with minimal energy costs. This unique combination of features makes the Ventair Heatforce DC an efficient and economical choice for any space.
| Extraction Rate | 285 m3/hr (79 l/s) |
|---|---|
| Light: | CCT LED Light |
| Heat Lamps: | 4 x Heat Globes (275W) |
| Hole (Cutout) Size: | 320mm x 320mm |
| Fascia Size: | 395mm x 395mm |
| Ductable: | Yes (150mm diameter) |
Comes with a Flexible Duct(150mm x 2m) and an External Vent.
View full technical specs further down the page
Key Features:
- Mould reduction technology
- DC energy efficient motor
- Thermal safety switch
- Instant radiant heat
- Energy saving back draft shutter
- LED Tri-colour Temperature: 3000K, 4000K, 5000K
The wall control lets you independently operate the fan, light, or heat globes. A switch on the unit itself allows you to select the mode of operation: standard, 24-hour continuous, or 10-minute run-on.
| Exhaust Setting | 24/7 | Standard |
|---|---|---|
| Motor Type | DC | DC |
| Extraction Rate | 75m3/hr | 285m3/hr |
| Power | 2.5watts | 25watts |
| Motor Speed | 500rpm | 1450rpm |
| Noise Levels | 28dB(A) | 42dB(A) |
The device has a 10w CCT LED light. Changeable colour temperatures (3000K, 4000K, and 5000K, respectively) are available for Warm White, Natural White, and Cool White.
| Manufacturer | Ventair |
|---|---|
| Model Number | HEA4W |
| Colour | White |
| Material | Plastic |
| Type of Light | LED |
| Capacity (m3/hr) | 285 m3/hr |
| Capacity (L/S) | 79 L/s |
| Number of Heat Lamps | 4 |
| Installation | This fan requires hardwiring by an electrician |
| Installation Location | Ceiling |
| Minimum Install Depth | 220mm |
| Ductable? | Ductable |
| Duct Location | Side Ducted |
| IP Rating | IPX4 |
| Noise Level | 42 dB(A) |
| Warranty | Ventair – The manufacturer offers a 2 year in home warranty followed by a three year replacement warranty on the motor. |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
| Barcode Number | 9339310015017 |
1 review for Ventair Heatforce DC 3 in 1 Exhaust Fan with Heat and CCT LED Light – White 4 Globes
Only logged in customers who have purchased this product may leave a review.
Elizabeth (verified owner) –
We’re very happy with our new exhaust fan for our ensuite. It’s wonderfully quiet and efficient in removing any steam and we love the very low profile, elegant fit. The only feedback we’d give is that the switch to select 24hr continuous/10 min run on/on/off, should be positioned within the underside of the casing, rather than on top. This would avoid having to uninstall the fan to make an adjustment. The second detractor was that in very hot weather, heat build-up in our roof space triggered the fan to run. When this happened, the only solution was temporary disabling of the unit from the power box. Those issues notwithstanding, we’re very pleased with our purchase and with the service provided by Pure Ventilation.
Excellent communication throughout the purchase/delivery process.