-
×
275w Heat Globe for Ventair Heatforce
1 × $17.00
BathroomEducation & Advice
Fans by Type
Vents & Accessories
Inline Fans
Heat Transfer
Subfloor
Energy Saving
Cooling / Heating
Ventair Heatforce DC Exhaust Fan + Heat + Light with Remote – White 4 Globes
IN STOCK | Typically dispatches within 3-5 business days.
$378.00
The Ventair Heatforce DC 3-in-1 unit is a multifunctional appliance that offers exhaust, instant heat through four globes, and LED lighting. It features an exhaust fan with three selectable modes: standard, 24-hour continuous operation, and a 10-minute run-on timer, controlled via a switch on the motor. In 24-hour mode, the unit uses only 2.5 watts, ensuring continuous ventilation with minimal energy consumption. This combination of features makes the Ventair Heatforce DC both efficient and cost-effective. Additionally, the kit includes a remote control with long-range universal frequency, providing convenient and flexible operation from anywhere in the room (similar functions to the wall control).
| Extraction Rate | 285 m3/hr (79 l/s) |
|---|---|
| Light: | CCT LED Light |
| Heat Lamps: | 4 x Heat Globes (275W) |
| Hole (Cutout) Size: | 320mm x 320mm |
| Fascia Size: | 395mm x 395mm |
| Ductable: | Yes (150mm diameter) |
Comes with a Flexible Duct(150mm x 2m) and an External Vent.
View full technical specs further down the page
Key Features:
- Mould reduction technology
- DC energy efficient motor
- Thermal safety switch
- Instant radiant heat
- Energy saving back draft shutter
- LED Tri-colour Temperature: 3000K, 4000K, 5000K
The Kit comes with a long range universal frequency remote control. The wall control lets you independently operate the fan, light, or heat globes. A switch on the unit itself allows you to select the mode of operation: standard, 24-hour continuous, or 10-minute run-on.
| Exhaust Setting | 24/7 | Standard |
|---|---|---|
| Motor Type | DC | DC |
| Extraction Rate | 75m3/hr | 285m3/hr |
| Power | 2.5watts | 25watts |
| Motor Speed | 500rpm | 1450rpm |
| Noise Levels | 28dB(A) | 42dB(A) |
This unit features a 10w CCT LED Light. It is switchable between Warm White, Natural White and Cool White colour temperatures (3000K, 4000K, 5000K, respectively).
| Manufacturer | Ventair |
|---|---|
| Model Number | HEA4W + V31RFR |
| Colour | White |
| Material | Plastic |
| Type of Light | LED |
| Capacity (m3/hr) | 285 m3/hr |
| Capacity (L/S) | 79 L/s |
| Number of Heat Lamps | 4 |
| Installation | This fan requires hardwiring by an electrician |
| Installation Location | Ceiling |
| Minimum Install Depth | 220mm |
| Ductable? | Ductable |
| Duct Location | Side Ducted |
| IP Rating | IPX4 |
| Noise Level | 42 dB(A) |
| Warranty | Ventair – The manufacturer offers a 2 year in home warranty followed by a three year replacement warranty on the motor. |
| Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
| Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
| Barcode Number | 9339310015017 + 9339310007500 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.