|Recommended Room Size (Based on Achieving 15 air changes per hour)|
This fan comes with a lead and plug for connection to a power socket
|Motor Power (Wattage)|
Fantech – The manufacturer offers a 5 year replacement warranty (conditions apply)
All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible
|Room Size Recommendation Disclaimer|
As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice.
Ezifit Thru Roof Exhaust Fan (Metal Roof) 200mm
Capacity: 1296 m3/hr (360 l/s)
Motor Type: Centrifugal
Ductable: Yes (200mm duct diameter)
View full technical specs further down the page
The Ezifit Thru Roof exhaust fan is easy to install and provides high air flow with a low noise output. It allows high power air extraction from one or more points and is suitable for connection to long duct runs. Suitable for metal roof installation types, typical applications include domestic bathrooms, toilets, kitchens, range hoods, and small commercial applications.
The fan is constructed using robust galvanised steel and the motor is continuous rated. The fan comes with a convenient 3 pin plug and lead meaning it will simply plug into a powerpoint. Finally this product can be speed controlled if required – please see the accessory listed below. This would need to be wired to the fan by an electrician.
Requires a minimum 400mm of roof cavity space for installation.
Please Note: Requires a minimum 400mm of roof cavity space for installation.
Only logged in customers who have purchased this product may leave a review.