Manufacturer | Martec |
---|---|
Model Number | MBHP1000M |
Colour | Black |
Material | Plastic |
Hole Size | 475mm x 325mm |
Type of Light | LED |
Capacity (m3/hr) | 500 m3/hr |
Capacity (L/S) | 138.88 L/S |
Recommended Room Size (Based on Achieving 15 air changes per hour) | 32 m3 |
Minimum Install Depth | 220mm |
Installation | This fan requires hardwiring by an electrician |
Installation Location | Ceiling |
Includes Backdraft Shutter | Yes |
Ductable? | Ductable |
Duct Location | Side Ducted |
Duct Size | 150mm |
Warranty | Martec: The manufacturer offers a 2 year in home warranty |
Capacity Disclaimer | All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible |
Room Size Recommendation Disclaimer | As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice. |
Martec Phoenix 3 in 1 1000w Heat & LED Light – Black
$369.00
Capacity: 500 m3/hr (138.89 l/s)
Light: Includes 1x 20W CCT LED
Heat: 1000w R7s Heat Tube
Hole (Cutout) Size: 475mm x 325mm
Face Size: 500mm x 350mm
Ductable: Yes (includes duct and a vent)
View full technical specs further down the page
The Martec Phoenix is a 3 in 1 exhaust fan with CCT LED Light and Heat lamp. This exhaust fan is a sleek, easy to clean low-profile design. The R7s heat rod is controllable and able to be put on two different settings, 50% and 100% power. This fan is side-ducted to 150mm ducting. The box includes 1.5m ducting, an external grille and a 3 gang switch wall controller.
————-
This product is currently Out of Stock with no expected arrival date. For this reason it cannot be purchased. If you would like some options for suitable alternatives please contact us
Reviews
There are no reviews yet.