Fanco ‘Quiet 150’ 2 Speed Exhaust Fan – White 150mm


$249.00 $159.00


Purchase this product and earn 159 PurePoints for a discount on a future purchase

4.67 out of 5 based on 3 customer ratings
(3 customer reviews)
3 reviews  |  Write a review

in stock

Capacity: 315 m3/hr (87.5 l/s)
Hole (Cutout) Size: 155mm Round
Face Size: 214mm Square
Ductable: Yes (150mm duct diameter)
View full technical specs further down the page

The Quiet 150 is a ceiling or wall mounted exhaust fan which has been specifically engineered to operate quietly. The unit has a capacity of 315m3/hr, it is a two speed motor and on the low speed the unit has a capacity of 220m3/hr. The desired capacity is achieved by wiring the fan to the relevant speed setting. This fan is relatively unique as it has anti vibration technology which helps to further reduce noise generated from the motor.

Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.



Model Number






Hole Size


Capacity (m3/hr)

315 m3/hr

Capacity (L/S)

87.5 L/S

Recommended Room Size (Based on Achieving 15 air changes per hour)


Motor Power (Wattage)


Motor Height


Noise Level

33 dB(A)

IP Rating





This fan requires hardwiring by an electrician

Installation Location

Ceiling or Wall

Includes Backdraft Shutter




Duct Location

Rear Ducted

Duct Size



Fanco – The manufacturer offers a 2 year replacement warranty (conditions apply)

Capacity Disclaimer

All capacity figures and technical data quoted is provided by the manufacturer, Capacity figures are based on the unit freeflowing (not connected to ducting). If you are ducting this unit it is advisable to keep the duct run as short, straight and tight as possible

Room Size Recomendation Disclaimer

As stated our "Recommended room size" figures are based on achieving 15 air changes per hour. Generally we have found this to be suitable, however it does not constitute specific advice.

Room Size

Large (20m3+), Medium (10m3 – 20m3)

quiet fan dimensions
quiet fan specs
quiet exhaust fan exploded diagram
150 quiet exhaust fan pressure curves

3 reviews for Fanco ‘Quiet 150’ 2 Speed Exhaust Fan – White 150mm

  1. 5 out of 5

    (verified owner)

  2. 4 out of 5

    (verified owner)

  3. 5 out of 5

    (verified owner)

    Compact, quiet and well built

Only logged in customers who have purchased this product may leave a review.

Installation - All electrical goods must be installed by a licensed electrician unless they are DIY products (e.g. with lead and plug).

Prices - All prices are in AU$ and inclusive of GST.

Trade Pricing - We offer a 5% discount on orders with 5+ quantity of any single item, or orders $1,000+

Delivery Method - While we do not have a showroom, all products are listed in detail on our website. If you have any further questions, please contact us. Our warehouse is not currently set-up to accommodate pick-ups, we do however dispatch promptly with reliable post and courier services Australia wide. If you need urgent delivery, please contact us prior to purchasing to get an estimate delivery time and delivery options.

Delivery Cost - Most orders over $300 will qualify for free delivery, however some rural and remote areas may not be included. To check if your postcode qualifies, simply add the item(s) to the Cart where you can input your State and Postcode to calculate shipping. For further and more detailed shipping information, click here.


  • Single roll of duct tape.

    4.80 out of 5
  • This 150mm ducting (6m length) can be cut down to suit required length. For best airflow, it is recommended to keep the duct tight, as short as possible, avoid sharp turns and keep duct as round in shape (do not squash it).
    Choose the duct size to suit the exhaust fan and for best airflow, use same size or bigger duct than required by the fan.
    This is non-insulated ducting (please see alternative product listings for insulated ducting if required).

    4.88 out of 5
    $26.00 $17.00
  • Add this product to your shopping cart if you wish for us to install a flex and plug to your fan. The cord on this plug in 1m in length.

    Please Note: We are unable to accept returned fans that have a flex and plug installed.


    Note: This lead and plug option can only be used in conjunction with specific fans – Please refer to compatible accessories below product listings.

  • Single roll of hanging tape. 30m (approx)

    5.00 out of 5
  • The Vent Fixed Louvre is a vent/grille for use with exhaust fans. It is normally placed on the outside wall or under the eaves.

    5.00 out of 5
  • Manufactured in quality stainless steel, this gravity louvred vent – commonly known as a flap vent – is designed to allow air to be vented into the atmosphere, while stopping cold air and pests entering the system when not in use.

    It has gravity flaps that opens up when the fan runs. (the fan blows the flaps open with the air it pushes). It is ideal for keeping insects out (in windy areas, the flaps can move due to the wind creating some noise)

    • Supplied with rear flange attachment, screws and rubber gasket
    • Stainless steel
    • Rear flange for ducting attachment
    • Suits 150mm diameter duct
    5.00 out of 5
  • This package includes a vent with gravity operated shutters (suitable for mounting on a wall, ceiling or eave) and 2m of 150mm diameter flexible ducting.
    It is usually used with ductable exhaust fans mounted on the ceiling and allows for exhausting air outside through a wall.
    The vent/grille is a white gravity vent that has been treated to be safely placed outside.

  • A plastic gravity vent designed for 150mm ducting. The vent has a 186mm square face and is designed to screw into the external wall. A popular accessory to a wall mounted extraction fan.

    • Made of quality and durable plastic
    • Screw fixing
    5.00 out of 5
    $25.00 $20.00