Simple Thermostat for Heat Transfer Systems – Electrician Required

This simple thermostat controls the fan in Heat Transfer kits and systems. It can be used in heat and cool applications by wiring the thermostat as required – an electrician is required for installation. The thermostat does not use batteries. It has an on/off switch on the side of the unit, so the fan is either always off or controlled by the thermostat setting. It is usually placed in the same room as the heater, so it will turn on the fan once that room is warm and the extra heat can be taken to other rooms. Once the temperature drops, because too much heat has been taken off or the heater has been turned off, the thermostat will turn off the fan.

The thermostat can be wired in one of two ways. To either operate until the room reaches the preset temperature or to operate starting from the preset temperature. We usually recommend the latter, which ensures your room with the heat source gets warm enough before you transfer the heat to other rooms.