Ceiling Exhaust Fans

Choosing A Ceiling Exhaust Fan

When choosing a ceiling exhaust fan, use the following to help you:

  • Calculating the area of the room you wish to install the ceiling exhaust fan (Length x Width x Height). Then multiply this number by the number of air changes required (approximately 10 for a standalone toilet and 15 for a shower. This will give you the approximate capacity (or airflow) required to ventilate the room.
  • Does the ceiling exhaust need to be ducted?
  • If it is replacing an existing fan, what hole cut-out size does it need to fit?

Once you have this information, use the interactive options on the left hand side to narrow your search to find your ceiling exhaust fan solution. Back to all exhaust fans.

Display:  List Grid

Showing 1–24 of 151 results

  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 240mm Square – Face protrudes approx 56mm from wall to cover
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The IP24 rated LD Auto features a modern design and aesthetic look with an attractive square fascia. This unit is ideal for bathroom, showers, kitchens and other utility spaces. The built in auto shutter provides automatic opening/closing once the unit is turned on/off. The impeller design enhances the fan efficiency and prolongs the motor service life. This fan is well suited for walls with limited cavity space – the flange requires only 81mm. This is because the motor is situated behind the front cover, this means that the protrusion from wall to cover is 56mm. For more information take a look at the dimensions diagram in the image gallery.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00 $149.00
  • Capacity: 295 m3/hr (81.94 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 240mm Square – Face protrudes approx 56mm from wall to cover
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The IP24 rated LD Auto features a modern design and aesthetic look with an attractive square fascia. This unit is ideal for bathroom, showers, kitchens and other utility spaces. This model has an inbuilt run on timer and can be set to continue operating for 2-30 mins after turning the unit off. The built in auto shutter provides automatic opening/closing once the unit is turned on/off. The impeller design enhances the fan efficiency and prolongs the motor service life. This fan is well suited for walls with limited cavity space – the flange requires only 81mm. This is because the motor is situated behind the front cover, this means that the protrusion from wall to cover is 56mm. For more information take a look at the dimensions diagram in the image gallery.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $169.00
    PRE-SALE
    NO ETA
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.83 out of 5
    $179.00 $119.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $189.00 $129.00
  • Capacity: 270 m3/hr (75 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Square
    Motor Height: 194mm
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Metro PRO is a high capacity ceiling mounted exhaust fan that comes with an ultra modern low profile cover.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.80 out of 5
    $109.00 $79.00
    PRE-SALE
    ETA Late November
  • Capacity: 290 m3/hr (80.50 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 265mm Round
    Motor Height: 173mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 290 m3/hr extraction rate. The fan comes with a lead and plug for easy installation.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $109.00
  • Capacity: 390 m3/hr (108 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 312mm Round
    Motor Height: 209mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 390 m3/hr extraction rate. The fan comes with a lead and plug for easy installation.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $129.00
  • Capacity: 290 m3/hr (80.50 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 265mm Round
    Motor Height: 173mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 290 m3/hr extraction rate. This model of the Flow features a 12W LED lights with switchable tricolour light temperatures of 3000k (Cool White), 4000k (Neutral White) and 5000k (Warm White). The fan must be This hardwired by a qualified electrician.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $149.00
  • Capacity: 390 m3/hr (108 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 312mm Round
    Motor Height: 209mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 390 m3/hr extraction rate. This model of the Flow features a 12W LED lights with switchable tricolour light temperatures of 3000k (Cool White), 4000k (Neutral White) and 5000k (Warm White). The fan must be This hardwired by a qualified electrician.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00
  • Capacity: 290 m3/hr (80.50 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 265mm Square
    Motor Height: 173mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 290 m3/hr extraction rate. The fan comes with a lead and plug for easy installation.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $109.00
  • Capacity: 390 m3/hr (108 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 312mm Square
    Motor Height: 209mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 390 m3/hr extraction rate. The fan comes with a lead and plug for easy installation.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $129.00
  • Capacity: 290 m3/hr (80.50 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 265mm Square
    Motor Height: 173mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 290 m3/hr extraction rate. This model of the Flow features a 12W LED lights with switchable tricolour light temperatures of 3000k (Cool White), 4000k (Neutral White) and 5000k (Warm White). The fan must be This hardwired by a qualified electrician.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $149.00
  • Capacity: 390 m3/hr (108 l/s)
    Hole (Cutout) Size: 295mm Round
    Face Size: 312mm Square
    Motor Height: 209mm 
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Martec Flow is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The Flow comes with a built in backdraft shutter and offers a powerful 390 m3/hr extraction rate. This model of the Flow features a 12W LED lights with switchable tricolour light temperatures of 3000k (Cool White), 4000k (Neutral White) and 5000k (Warm White). The fan must be This hardwired by a qualified electrician.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $169.00
  • Capacity: 400 m3/hr (111.11 l/s)
    Hole (Cutout) Size: 290mm Round
    Face Size: 325mm Square
    Motor Height: 194mm – Requires 220mm of ceiling space
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Metro Quiet boost is a high quality modern ceiling exhaust fan that can be connected to 150mm ducting. The metro comes with a built in backdraft shutter and offers a powerful 400 m3/hr extraction rate. The fan comes with a lead and plug for easy installation.


    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $119.00 $99.00
  • Capacity: 270 m3/hr (75 l/s)
    Hole (Cutout) Size: 240mm Round
    Face Size: 270mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Luna PRO is a high capacity ceiling mounted exhaust fan that comes with an ultra modern low profile cover.

    This fan is side ducted and comes with a built in backdraft shutter.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    5.00 out of 5
    $109.00 $79.00
    PRE-SALE
    ETA Late November
  • Capacity: 400 m3/hr (111.11 l/s)
    Hole (Cutout) Size: 290mm Round
    Face Size: 325mm Round
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Luna Quiet Boost is a high capacity, low noise ceiling exhaust fan by Fanco Australia. The Luna Quiet Boost offers an extraction rate of 400 m3/hr. The unit features an attractive, modern low profile fascia.

    This fan is side ducted and comes with a built in backdraft shutter.

     


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.67 out of 5
    $129.00 $99.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $224.00 $168.00
  • Capacity: 264 m3/hr (73.33 l/s)
    Hole (Cutout) Size: 150mm Round
    Face Size: 206mm Square
    Ductable: Yes (150mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $214.00 $158.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $184.00 $138.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $170.00 $128.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $149.00 $99.00
  • Capacity: 166 m3/hr (46.11 l/s)
    Hole (Cutout) Size: 125mm Round
    Face Size: 177mm Square
    Ductable: Yes (125mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    4.00 out of 5
    $135.00 $89.00
  •  

    Capacity: 88 m3/hr (24.44 l/s)
    Hole (Cutout) Size: 100mm Round
    Face Size: 152mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $165.00 $128.00
  • Capacity: 88 m3/hr (24.44 l/s)
    Hole (Cutout) Size: 100mm Round
    Face Size: 152mm Square
    Ductable: Yes (100mm duct diameter)
    View full technical specs further down the page


    The Chico range features a modern design with a capable exhaust fan. It is a ductable ceiling or wall mounted exhaust fan with a very modern low profile fascia, which makes it popular with interior designers and architects. This package comes with a 1-25 minute variable run on timer. The timer is adjustable and can be set from anything from 1-25 minutes depending on your preference. This will need to be hardwired to to the fan by an electrician.


    Need Accessories? – Scroll to the bottom of the page to view suitable accessories including ducting and vents.
    $150.00 $118.00